Temperature

SBE 9plus
Premium profiling Conductivity, Temperature, Pressure, eight channels for auxiliary sensors, interface for dual C & T sensors, with 24 Hz sampling. Primary oceanographic research tool chosen by world's leading institutions.
SBE 16plus V2 CTD
Moored Conductivity, Temperature, (optional) Pressure, and up to seven auxiliary sensors, at user-programmable intervals.
SBE 16plus-IM V2
Moored Conductivity, Temperature, (optional) Pressure, and up to seven auxiliary sensors, at user-programmable intervals, communicating via Inductive Modem (IM) telemetry.
Profiling Conductivity, Temperature, Pressure, and up to ten auxiliary sensors, with 16 Hz sampling, and internal memory and batteries.
SBE 19plus V2 with optional cage, SBE 5P pump, & SBE 43 DO sensor
Profiling or moored Conductivity, Temperature, Pressure, and up to seven auxiliary sensors, with 4 Hz sampling, and internal memory and batteries.
SBE 49 FastCAT CTD
Conductivity, Temperature, and Pressure at 16 Hz. No memory or internal power; intended for use on vehicles that can supply power and acquire data.
SBE 52-MP with optional Dissolved Oxygen Sensor
Conductivity, Temperature, Pressure, optional Dissolved Oxygen, at 1 sample/sec (1 Hz). RS-232 or Logic Level interface, no batteries, small memory — for use on moored profiling vehicles that can supply power and acquire data.
Glider Payload CTD with Pump
Measures conductivity, temperature, and pressure, and optionally, dissolved oxygen. Modular, low-power profiling instrument for autonomous gliders.
Slocum Glider Payload CTD
Low-power profiling CTD designed specifically for installation in Slocum gliders.
SBE 41 Argo CTD for Autonomous Profiling Floats
Autonomous profiling CTD for Argo and other programs, supplying more than 90% of the annual Argo program floats.
Moored Conductivity, Temperature, (optional) Pressure, and (optional) Dissolved Oxygen measurements, at user-programmable intervals. Now also available with pH (37-SMP-ODO with SeaFET or Deep SeaFET). Available with RS-232, RS-485, SDI-12, and Inductive Modem interfaces.
Moored Conductivity, Temperature, (optional) Pressure, and Optical Dissolved Oxygen measurements, at user-programmable intervals. RS-232, RS-485, or dual RS-232 and SDI-12 interface, internal memory, and internal battery pack.
 SeapHOx™ Ocean CT(D)-pH-DO Sensor
The Sea-Bird Scientific SeapHOx™ combines the SeaFET™ pH sensor with the SBE 37-SMP-ODO MicroCAT CTD+DO sensor.
SBE 37-SMP-IDO MicroCAT CTD-DO Recorder
The SBE 37-SMP-IDO was discontinued in 2014. Order the SBE 37-SMP-ODO in its place.
The Sea-Bird Scientific Deep SeapHOx™ combines the Deep SeaFET™ pH sensor with the SBE 37-SMP-ODO MicroCAT CTD+DO sensor. The Deep SeaFET adapts the MBARI/SIO/Honeywell Deep-Sea DuraFET technology to measure pH in a deep moored package.
SBE 37-SMP
Moored Conductivity, Temperature, and (optional) Pressure measurements, at user-programmable intervals. RS-232, RS-485, or dual RS-232 and SDI-12 interface, internal memory, and internal battery pack.
SBE 37-SM
Moored Conductivity, Temperature, and (optional) Pressure measurements, at user-programmable intervals. RS-232 or RS-485 interface, internal memory, and internal battery pack.
 
Moored Conductivity, Temperature, (optional) Pressure, and Optical Dissolved Oxygen measurements at user-programmable intervals. RS-232, RS-485 interface and internal memory; powered externally.
SBE 37-SIP-IDO
Moored Conductivity, Temperature, (optional) Pressure, and (membrane-type) Integrated Dissolved Oxygen measurements, at user-programmable intervals. RS-232 interface, internal memory; external power.
SBE 37-SIP
Moored Conductivity, Temperature, and (optional) Pressure measurements, at user-programmable intervals. RS-232 or RS-485 interface and internal memory; external power.
SBE 37-SI
Moored Conductivity, Temperature, and Pressure (optional) measurements, at user-programmable intervals. RS-232 or RS-485 interface and internal memory; external power.
Moored Conductivity, Temperature, Optical Dissolved Oxygen, and (optional) Pressure measurements, at user-programmable intervals. Inductive Modem (IM) interface, internal memory, and internal battery pack.
SBE 37-IMP-IDO MicroCAT CTD-DO Recorder
The SBE 37-IMP-IDO was discontinued in 2014. Order the SBE 37-IMP-ODO in its place.
SBE 37-IMP
Moored Conductivity, Temperature, and (optional) Pressure measurements, at user-programmable intervals. Inductive Modem (IM) interface, internal memory, and internal battery pack.
SBE 37-IM
Moored Conductivity, Temperature, and (optional) Pressure measurements, at user-programmable intervals. Inductive Modem (IM) interface, internal memory, and internal battery pack.
SBE 39plus - just a few of the configuration choices
Temperature and (optional) Pressure, at user-programmable intervals. Internal memory and battery pack, RS-232 and USB interface. Configurations with internal or external thermistor, external connector, pressure.
 
The SBE 39-IM was discontinued in May 2016. Order the SBE 39plus-IM in its place.
SBE 39plus-IM
Moored Temperature and (optional) Pressure, at user-programmable intervals. Internal memory and battery, Inductive Modem (IM) interface.
SBE 56
Low-cost, high-accuracy, battery-powered temperature and time logger, with user-programmable sampling interval.
Externally powered thermosalinograph for shipboard determination of sea surface (pumped-water) conductivity and temperature. Internal memory, acquisition of NMEA navigational data and remote temperature data, and capability to interface with auxiliary sensors.
Small, externally powered thermosalinograph designed for shipboard determination of sea surface (pumped-water) conductivity and temperature. Can be integrated with interface box for NMEA data and acquisition of remote temperature data.
SBE 38 Digital Oceanographic Thermometer
Standards-level performance of an expensive AC bridge and platinum thermometer at a small fraction of the cost. Real-time temperature data is transmitted in ASCII characters (°C or raw counts) via an RS-232 or optional RS-485 serial interface for display or logging by PC or data logger.
SBE 35 Deep Ocean Standards Thermometer
Laboratory standards thermometer that can be used both in fixed point cells and at depths to 6800 m. Remove temperature guard (shown in photo) for laboratory applications.
SBE 35RT Digital Reversing Thermometer
Temperature sensor for use with Sea-Bird water sampler systems, taking a measurement each time a bottle closure confirmation is received, for comparison with the water bottle data.
SBE 3plus Premium CTD Temperature Sensor
Fast-response, frequency-output, extremely low-drift temperature sensor, for use on SBE 9plus profiling CTD.
SBE 3F CTD Temperature Sensor
Fast-response, frequency-output temperature sensor, for use on SBE 25 and 25plus Sealogger profiling CTD.
SBE 3S Oceanographic Temperature Sensor
Slow-response, frequency-output temperature sensor, for high-accuracy industrial and environmental monitoring at fixed sites.
SBE 48 Hull Temperature Sensor
Temperature recorder installed with magnets just below water line on inside of ship, providing shipboard determination of sea surface temperature.
Lightweight instrument for use in marine profiling applications where its high speed and spatial resolving power offer the ability to characterize small scale ocean temperature features.
SBE 26plus Seagauge Wave & Tide Recorder
Wave and Tide, Temperature, and optional Conductivity data, with internal memory and batteries and real-time tide and wave data. Photo shows 26plus being secured in accessory mounting fixture. After installation at mooring, fixture allows removal & precise repositioning by diver. No tools required; no loose parts to misplace.
SBE 53 Bottom Pressure Recorder
Full ocean depth water level, with extremely high resolution, accuracy, and stability. Precision thermometer, optional conductivity sensor.
Autonomous profiling float for Argo and other programs, with Sea-Bird CTD. Sufficient power for 300 CTD profile cycles to 2000 dbars.
Autonomous profiling float for Argo and other programs, with Sea-Bird CTD and Dissolved Oxygen sensor, integrated WET Labs MCOMS fluorometer/backscattering sensor, and multiple optional bolt-on sensors. Sufficient power for 250 CTD profile cycles to 2000 dbars (excluding optional sensors).
Autonomous profiling float for Argo and other programs, with Sea-Bird CTD, Dissolved Oxygen sensor, integrated WET Labs ECO-MCOMS fluorometer/backscattering sensor and Sea-Bird Scientific Float Deep SeaFET™ ph sensor. The Float Deep SeaFET adapts the field-tested MBARI/SIO/Honeywell Deep-Sea DuraFET technology to measure pH on the Navis BGCi float.
Subscribe to Temperature