Sea-Bird Electronics              Products            Support            Software            Sales            Service            Search/Sitemap

SBE 16 and SBE 19 Seacat Trade-In Program


SBE 19plus V2 (SBE 16plus V2 similar)

Do you have an original SBE 16 or SBE 19?

Sea-Bird produced the SBE 16 and 19 between 1987 and 2000. At the end of 2000 they were replaced by the SBE 16plus and 19plus, and later (2008) with the SBE 16plus V2 and 19plus V2. Parts for the original SBE 16 and 19 are becoming difficult to procure because of component obsolescence, and at some point in the near future we will be unable to support the SBE 16 and 19, except for routine calibration. The original SBE 16 and 19 cannot be upgraded to a 16plus V2 or 19plus V2, because of part incompatibilities. Consequently, Sea-Bird is offering a Trade-In Program to provide you with an opportunity to improve your measurement capability and accuracy:

Trade in your SBE 16 or SBE 19, and receive a $1500.00 discount on the net price of a new SBE 16plus V2 or SBE 19plus V2 (only one $1500.00 discount can be used per purchased instrument). This offer is valid for orders placed by March 31, 2012.

Summarizing the advantages of the SBE 16plus V2 and 19plus V2:

  SBE 16 and 19 SBE 16plus V2 and 19plus V2
Temperature accuracy (initial) 0.01 °C 0.005 °C
Conductivity accuracy (initial) 0.001 S/m 0.0005 S/m
Pressure accuracy
(initial, with standard strain-gauge sensor)
0.25% of full scale range 0.1% of full scale range
Number of A/D input channels
for auxiliary sensors
2 differentially amplified channels
or 4 single-ended channels
6 differentially amplified channels
Power for A/D sensors 50 mA 500 mA
A/D sensor input resolution 12 bit 14 bit
Number of RS-232 input channels
for auxiliary sensors
0 1
Memory 1, 2, 4, or 8 MB, static RAM 64 MB, FLASH RAM
Data Output Raw hex (requires post-processing) Raw hex or engineering units
Profiling Sample Rate
(not applicable to SBE 16 or 16plus V2)
2 Hz (2 samples/sec) 4 Hz (4 samples/sec)
Minimum moored sample interval 15 sec 10 sec
Firmware Upgrade Required return to Sea-Bird User download through communications port
     

Contact Sea-Bird (seabird@seabird.com) with the serial number(s) of your old SBE 16 or SBE 19, and get a quote on a new SBE 16plus V2 or SBE 19plus V2.

[HRule Image]

Last modified: 16-Aug-2011

Sea-Bird Home     Phone: (+1) 425-643-9866     Fax: (+1) 425-643-9954     E-mail: seabird@seabird.com