Spare PartsSpare Parts
This spare parts list includes our most commonly used/ordered spare parts and spare parts kits (see separate listings for cables, mount kits for Sea-Bird sensors, and mount kits for third party sensors).
The actual part number required is dependent on the specific instrument, because instrument options selected at the time of purchase affect the spare parts required and mechanical designs have changed over the years. To ensure that you are purchasing the correct parts, consult Sea-Bird with your instrument's serial number and information about your instrument configuration before placing an order. (Click here to see where to find the serial number on your instrument.)
The Sea-Bird part number is listed for each spare part or spare part kit. Where applicable, the kit document number is linked to an Adobe Acrobat .pdf.
Note: We do not publish prices on the website. Please contact Sea-Bird (seabird@seabird.com or 425-643-9866) for pricing.
Click the instrument in the list below or scroll through the page to find the desired spares.
Links to other Sales pages:
23041 Zinc anode ring for end cap
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50315 Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately.
50033 O-ring kit for SBE 4 (document 67067)50246 O-ring kit for SBE 4 Quick Disconnect
23548 Zinc anode ring for end cap
50062 Pump housing o-ring kit for SBE 5M (titanium or plastic housing), 5T, or 5P (document 67029)23594 Pump end cap retainer
50391 Pump impeller replacement kit (includes impeller, o-rings, thrust washer; see Application Note 75: Maintenance of SBE 5T, 5P, and 5M Pumps))
23593 Pump impeller housing
23337 Air bleed valve, pump plumbing -- for profiling CTD deployed in vertical orientation
30387 1/2" nylon hose barb Y-fitting -- for profiling CTD deployed in vertical orientation
23557 Quick disconnect connector, for 1/2" diameter tubing, inserts into conductivity cell
23555 Quick disconnect connector, for 1/2" diameter tubing, receives tubing
30385 Tygon tubing, 1/4" ID X 3/8" OD, 2 m -- part of conductivity cell filling/storage device PN 50087
30382 Tygon tubing, 1/4" ID X 5/16" OD, 2 m -- connects T duct to C duct
30388 Tygon tubing, 1/2" ID X 3/4" OD, 2 m -- main plumbing
31450 Tygon tubing, 1/2" ID X 3/4" OD, 2 m, Black -- main plumbing, use to minimize exposure to light
30384 Tygon tubing, 7/16" ID X 9/16" OD, 2 m -- cell soaker tubing for SBE 4
30579 Tygon tubing, 3/8" ID X 1/2" OD, 2 m -- fits over ends of SBE 43 plenum
23041 Zinc anode ring for end cap
23041 Zinc anode ring for end cap
90199 CTD plumbing kit (document 67022)90088 CTD plumbing & TC duct tubing kit (document 67018)
Note: This kit includes flexible tubing for plumbing TC duct, but does not include TC duct. For TC duct parts, see 90085 below.90085 TC duct & plumbing kit (document 67051)
50070 O-ring kit (document 67009)
50246 Conductivity disconnect fitting spare o-ring kit
50089 Jackscrew kit
50025 Pressure sensor oil refill kit (document 67066)
50024 Hardware kit for SBE 9plus with aluminum housing (document 67053)
50138 Hardware kit for SBE 9plus with titanium housing (document 67131)
varies Conductivity cell tube support kit (document 67068)
50088 Seaspares kit for SBE 9plus with aluminum housing (hardware, o-rings, cables, dummy plugs, connectors, zinc anodes, fuses, etc.) (document 67025)
50139 Seaspares kit for SBE 9plus with titanium housing (hardware, o-rings, cables, dummy plugs, connectors, fuses, etc.) (document 67128)
50321 Seaspares kit for SBE 9plus with aluminum housing & wet-pluggable connectors (hardware, o-rings, cables, dummy plugs, connectors, zinc anodes, fuses, etc.) (document 67129)
50322 Seaspares kit for SBE 9plus with titanium housing & wet-pluggable connectors (hardware, o-rings, cables, dummy plugs, connectors, fuses, etc.) (document 67130)
31634 Hardigg shipping case (AL4915-1105)
50002 O-ring kit for SBE 13 (3400 m) (document 67064)50014 O-ring kit for SBE 13 (6800 m) (document 67012)
50017 Dissolved Oxygen module refurbishment kit for SBE 13B or 23B Beckman (document 67031)
(Note: As of March 1, 2008, SBE 16plus and 16plus-IM are no longer in production, and are replaced by 16plus V2 and 16plus-IM V2.)
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
801483 9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) -- NOTE: batteries not included.
801479 3DD (10.8 V / 30 AH) lithium battery pack kit (document 67144) -- NOTE: batteries not included.
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50274 O-ring kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67102)
50273 Hardware kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67103)
90087 CTD plumbing kit (document 67108)
varies Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, or 44 (document 67142)
50434 Seaspares kit for SBE 16plus V2 or 19plus V2 with standard connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67196) -- ONLY applicable to 16plus V2 or 19plus V2
50435 Seaspares kit for SBE 16plus V2 or 19plus V2 with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67197) -- ONLY applicable to 16plus V2 or 19plus V2
50276 Seaspares kit for SBE 16plus or 19plus with standard connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67104) -- NOT applicable to 16plus V2 or 19plus V2
50301 Seaspares kit for SBE 16plus or 19plus with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67116) -- NOT applicable to 16plus V2 or 19plus V2
50323 Seaspares kit for SBE 16plus-IM or 16plus-IM V2 with standard connectors (hardware, o-rings, dummy plugs, connectors, etc.) (document 67132)
50324 Seaspares kit for SBE 16plus-IM or 16plus-IM V2 with wet-pluggable connectors (hardware, o-rings, dummy plugs, connectors, etc.) (document 67133)
801483 9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) -- NOTE: batteries not included.
801479 3DD (10.8 V / 30 AH) lithium battery pack kit (document 67144) -- NOTE: batteries not included.
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50315 Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately.
50012 O-ring kit for SBE 16 or 19 (document 67026)
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
50082 Hardware kit for SBE 16 with titanium housing (document 67081)
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
90087 CTD plumbing kit (document 67108)
50072 Support kit for SBE 16 or 19 (document 67017)
50051 Small hardware & o-ring kit for SBE 17plus with aluminum housing (document 67014)50140 Small hardware & o-ring kit for SBE 17plus with titanium housing (document 67125)
60021 Battery end cap for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
23155.1 Magnetic switch kit for SBE 17plus (drawing 20193 for switch; kit also includes 1 magnet)
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
801512 12 NiMH cells in rechargeable drop-in pack (14.4V/8Ah)
90504 NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable
801642 12 Ni-Cad cells in drop-in pack, 14.4V, 4.4 AH
90226 Ni-Cad battery charger (90/240 VAC) for 6/9/12 cells (16 hour charger)
50105 Support kit for SBE 17plus with aluminum housing (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67134)
50141 Support kit for SBE 17plus with titanium housing (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67135)
50328 Support kit for SBE 17plus with aluminum housing & wet-pluggable connectors (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67136)
50329 Support kit for SBE 17plus with titanium housing & wet-pluggable connectors (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67137)
30459 Plastic soaker bottle for pH probe
50020 pH sensor O-ring kit
24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)
23190C pH electrode guard
25001 KCl soaker solution, 500 ml bottle
23041 Zinc anode ring for end cap
(Note: As of March 1, 2008, SBE 19plus is no longer in production, and is replaced by 19plus V2.)
801511 9 NiMH cells in rechargeable drop-in pack (10.8V/8 Ah)
90504 NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable
801641 9 Ni-Cad cells in drop-in rechargeable pack (10.8V/4.4 Ah)
90226 Ni-Cad battery charger (90/240 VAC) for 6/9/12 cells (16 hour charger)
41124 Battery cover/contact plate, replaces 80076.1
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50274 O-ring kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67102)
50273 Hardware kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67103)
50275 Magnetic switch kit for SBE 19plus or 19plus V2 (document 67101)
90087 CTD plumbing kit (document 67108)
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50288 Moored mode conversion kit for SBE 19plus or 19plus V2 (document 67114)
50434 Seaspares kit for SBE 16plus V2 or 19plus V2 with standard connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67196) -- ONLY applicable to 16plus V2 or 19plus V2
50435 Seaspares kit for SBE 16plus V2 or 19plus V2 with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67197) -- ONLY applicable to 16plus V2 or 19plus V2
50276 Seaspares kit for SBE 16plus or 19plus (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67104) -- NOT applicable to 16plus V2 or 19plus V2
50301 Seaspares kit for SBE 16plus or 19plus with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67116) -- NOT applicable to 16plus V2 or 19plus V2
801269 Stainless-steel protective cage, 40 inch (101 cm) tall (drawing 22009 and document 67171) -- for 19plus or 19plus V2 with standard strain-gauge pressure sensor
801270 Stainless-steel protective cage, 48 inch (123 cm) tall (drawing 22010 and document 67171) -- for 19plus V2 with optional Digiquartz pressure sensor
31634 Hardigg shipping case (AL4915-1105), for SBE 19plus or 19plus V2 in cage
50012 O-ring kit for SBE 16 or 19 (document 67026)
50009 O-ring kit for SBE 19 (document 67076)
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
50249 Small hardware kit for SBE 19 (document 67015)
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50026 Magnetic switch kit for SBE 19 or 25 (document 67035)
50236 TC duct kit for SBE 19 (document 67088)
90087 CTD plumbing kit (document 67108)
50072 Support kit for SBE 16 or 19 (document 67017)
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50315 Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately.
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50315 Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. For SBE 21s shipped before October 2002.
50106 Hardware & o-ring kit for SBE 21 (document 67021)50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
50298 Support kit for SBE 21 compatible with SBE 38 remote temperature sensor (hardware, o-rings connectors, cell cleaning supplies, etc.) (document 67119)
50107 Support kit for SBE 21 compatible with SBE 3 remote temperature sensor (hardware, o-rings, connectors, cell cleaning supplies, etc.) (document 67060)
23388.2
SBE 21 top end cap blank (flow chamber seal when sensors removed)90399.1
SBE 21 electronics/sensor assembly (SBE 38 interface)90387.1 SBE 21 electronics/sensor assembly (SBE 3 interface)
23188.2 PVC water jacket/manifold assembly (no electronics or sensor housing)
24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)
50017 Dissolved Oxygen module refurbishment kit for SBE 13B or 23B Beckman (document 67031)
801511 9 NiMH cells in rechargeable drop-in pack (10.8V/8 Ah)
90504 NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable
801641 9 Ni-Cad cells in drop-in rechargeable pack (10.8V/4.4 Ah)
90226 Ni-Cad battery charger (90/240 VAC) for 6/9/12 cells (16 hour charger)
50069 Small hardware & o-ring kit for SBE 25 (document 67030)
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50026 Magnetic switch kit for SBE 19 or 25 (document 67035)
50246 Conductivity disconnect fitting spare o-ring kit
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
90199 CTD plumbing kit (document 67022)
90088 CTD plumbing & TC duct tubing kit (document 67018)
90085 TC duct & plumbing kit (document 67051)
50025 Pressure sensor oil refill kit (document 67066)
50332 Support kit for SBE 25 (hardware, o-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67127)
50331 Support kit for SBE 25 with wet-pluggable connectors (hardware, o-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67126)
23302C SBE 25 stainless steel protective cage
31634 Hardigg shipping case (AL4915-1105)
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
50056 Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)
801483 9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) for SBE 26 (not plus) -- NOTE: batteries not included.
801575 Battery Cover Spacer / Adapter, 12 D alkaline cells to 6 DD Electrochem Lithium cells
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50315 Anti-foul holder kit (for optional SBE 4 Conductivity Sensor) -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately.
24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)
30459 Plastic soaker bottle for pH probe
50020 pH sensor O-ring kit
24023 pH electrode
23190C pH electrode guard
25001 KCl soaker solution, 500 ml bottle
23041 Zinc anode ring for end cap
50025 Pressure sensor oil refill kit (document 67066)
23041 Zinc anode ring for end cap
24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)
Note: Full size SBE 32 comes in 2 frame sizes:
Small Frame --
1-inch diameter for 12 place (through 12-liter bottle size) and 24 place
(through 2.5-liter bottle size), and
Large Frame --
1.375-inch diameter for 12 place (larger than 12-liter bottle size) and 24 place
(larger than 2.5-liter bottle size)
50151 O-ring kit for SBE 32 (document 67050)50113 Hardware kit for SBE 32 with small frame (document 67010)
50116 Hardware kit for SBE 32 with large frame (document 67086)
50142 Hardware kit for SBE 32C or 32SC (document 67011)
50195 Hardware kit for SBE 32SC (document 67046)
50130.1 Hardware kit for SBE 32C (document 67048)
50130 Hardware kit for SBE 32C or 32SC (document 67047)
50111 Lifting bail kit for SBE 32 with small frame, 32C, or 32SC (document 67033)
50133 O-ring & hardware kit for SBE 32 with aluminum pylon (for latches & pylon) (document 67023)
50279 O-ring & hardware kit for SBE 32 with titanium pylon (for latches & pylon) (document 67109)
50172 O-ring & hardware kit for SBE 32 (stainless steel) pylon (document 67054)
50299 Titanium latch kit for SBE 32, 32C, or 32SC (document 67157) -- for 12-or 24-bottle Carousel50428 Titanium latch kit for SBE 32 -- for 36-bottle Carousel
50211 Extension stand u-bolt kit for SBE 32 with small frame (document 67078)
50112 Frame assembly kit for SBE 32 with small frame (document 67049)
50115 Frame assembly kit for SBE 32 with large frame (document 67079)
50340 Complete hardware kit for SBE 32 with small frame (document 67139)
50341 Complete hardware kit for SBE 32 with large frame (document 67140)
50342 Complete hardware kit for SBE 32C or 32SC (document 67141)
50123 Tool kit for SBE 32, 32C, or 32SC (document 67099)
50429 Frame coating repair kit for SBE 32, 32C, or 32SC (application note 88)
50265 Single bottle lanyard replacement kit (5 Nico-press sleeves, 8 feet of monofilament line, 1 brass hook, 2 plastic lanyard balls)
50135 Bottle repair kit for OTE water sample bottle (includes o-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls)
50175 Fixed point cell bushing, spare (not for SBE 35RT)
23041 Zinc anode ring for end cap
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50243.1
Lithium battery set (contains 6 each PN 80981.1)60024 Hardware & o-ring kit for SBE 37-SI (instruments delivered before December 1, 1999) (document 67083)
60023 Hardware & o-ring kit for SBE 37-SM or 37-IM (instruments delivered before December 1, 1999, with battery pack that requires knob to remove from instrument) (document 67032)
50239 Welded-bolt cable clamp kit for SBE 37-SM (instruments delivered before December 1, 1999) (document 67034)
60023.1 Hardware & o-ring kit for SBE 37-SM or 37-IM (instruments delivered before December 1, 1999) (document 67063)
60033 Hardware & o-ring kit for SBE 37-IM or 44 (instruments delivered after December 1, 1999) (document 67052)
60034 Hardware & o-ring kit for SBE 37-SI or 37-SIP (instruments delivered after December 1, 1999) (document 67091)
60035 Hardware & o-ring kit for SBE 37-SM or 37-SMP (instruments delivered after December 1, 1999) (document 67092)
varies Cable clamp kit for SBE 37-SM, 37-SMP, 37-SI, or 37-SIP (instruments delivered after December 1, 1999) (document 67094)
50264 Through-bolt mount SBE 37-SM, 37-SMP, 37-SI, or 37-SIP (instruments delivered after December 1, 1999) (document 67096)
varies Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, or 44 (instruments delivered after December 1, 1999) (document 67142)
31632 Storm shipping case (iM2950) -- holds up to 4 MicroCATs
22074
SBE 39 lithium battery, UltraLife U9VL, 9Vvaries Cable clamp kit for SBE 39, for use with or without fairing/net fender (document 67162 & drawing 41396)
60042 Standard spares kit for SBE 39 with serial number > 3000 (document 67159)
60032 Standard spares kit for SBE 39 with serial number < 3000 (document 67028)
60032.1 Spares kit for SBE 39 with low pressure Paine pressure sensor (document 67085)
31633 Storm shipping case (iM2600) -- holds up to 4 SBE 39s with external connector or 6 SBE 39s with internal connector (does not hold SBE 39s with net fenders)
22095
SBE 39-IM lithium battery, 3.6V AA (R6), Saft LS 14500 (39-IM uses 2)varies Cable clamp & guide kit for SBE 39-IM (document 67161)
60043 Standard spares kit for 39-IM with serial numbers 3089 through 3100 (document 67163)
60044 Standard spares kit for 39-IM with serial numbers greater than 3100 (document 67167)
31633 Storm shipping case (iM2600) -- holds up to 4 SBE 39-IMs (does not hold SBE 39-IMs with net fenders)
801617 SBE 43 Plenum Assembly, Version 2, Black Acetal
31450 Tygon tubing, 1/2" ID X 3/4" OD, 2 meters, Black
50243.1
Lithium battery set (contains 6 each PN 80981.1) 60033 Hardware & o-ring kit for SBE 37-IM or 44 (document 67052)varies Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, or 44 (document 67142)
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
60036 Hardware & o-ring kit for SBE 45 (document 67095)
60037 Hardware & o-ring kit for SBE 49 (document 67111)801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50312 Anti-foulant device in-line cap/cup assembly for SBE 49 or 52-MP (document 67123)
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50312 Anti-foulant device in-line cap/cup assembly for SBE 49 or 52-MP (document 67123)
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50056 Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)
801542 AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping) (replaces PN 801347)
50315 Anti-foul holder kit (for optional SBE 4 Conductivity Sensor) -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately.
801575 Battery Cover Spacer / Adapter, 12 D alkaline cells to 6 DD Electrochem Lithium cells
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, or AFM
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
50056 Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM document 67042)
50421 Frame assembly hardware kit for SBE 55
50429 Jackscrew kit for SBE 55
50422 SBE 55 Universal CTD / Electronics Installation Kit (document 67179)
801714 ECO 4-liter water sample bottle
50430 Bottle mounting and lanyard kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67194)
50424 Drain fitting kit for PN 801714 ECO 4-liter water sample bottle (document 67182)
50425 Air bleed kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67183)
50426 O-ring kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67184)
50427 Bottle repair kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67185)
50430 SBE 55 Bottle Mounting and Lanyard Kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67194)
50135 Bottle repair kit for OTE water sample bottle (includes o-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls) -- Note: Several early production models of SBE 55 were sold with Ocean Test Equipment (OTE) bottles instead of PN 801714 ECO 4-liter bottles. This repair kit is only for OTE bottles.
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26, 26plus, 52-MP, 53, 54, or AFM
60021 Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)
30044 Zinc anode, 1 inch diameter, for end caps
50092 Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26, 26plus, 52-MP, 53, 54, or AFM
30044 Zinc anode, 1 inch diameter, for end caps
50006 Hardware kit for Battlespace Jr Profiler (document 67037)50087 Conductivity cell filling & storage kit (document 67043)
50025 Pressure sensor oil refill kit (document 67066)
30411 Triton X-100, 500 ml
Kits are subject to change without notice.