Brochure/specifications
Manual
Note: We do not publish prices on the website. Please contact Sea-Bird [seabird@seabird.com
or (+1) 425-643-9866] for pricing.
| Part # | Description | Notes |
| 36 | CTD DECK UNIT - 115/230 VAC accessory for SBE 19/19plus/19plus V2 or SBE 25 CTD. Provides surface power & two-way communication via single-conductor armored cables up to 10,000 m long. Includes NMEA 0183 GPS interface, AC power cord, sea cable connector, RS-232 serial cable, PDIM test cable, NMEA interface test cable, SEASOFT software, & complete documentation. Requires use of Power/Data Interface Module (PDIM). Order 90227 or 90473 below or see also, SBE 19plus V2 or 25 options list. | SBE 36 CTD Deck Unit & PDIM
provide surface power & real-time data acquisition & control for SBE 19,
19plus,
19plus V2,
25, or 49
CTD, allowing deployment with 10,000 m long single-conductor
sea cables. SBE 36 is installed on ship, while PDIM is mounted on or near
CTD.
Notes: For photos of standard shipment, click here. |
|
SBE 36 Options |
||
| 36-1 | A/D voltage input channel for surface PAR sensor (QSR/QCR-2200) (PAR sensor & cable not included) | PAR data is appended to CTD data stream in SBE 36, & passed to computer for storage &/or display with CTD data. SBE 36 supplies 12 volts to power sensor. See Third Party portion of price list to order surface PAR sensor; see SBE 36 Accessories & Spares below to order cable. Note that PAR data cannot be appended to CTD data stream if using SBE 49 CTD. |
| 90227 | Underwater Power & Data Interface Module, with standard connectors, used w/ SBE 36 & CTD, 6800 m (does not include CTD interface cable or mounting hardware) |
 PDIM
is required to interface SBE 36 Deck Unit with CTD. PDIM housing is anodized aluminum, & is rated to 6800 m.
PDIM order includes sea cable extension cable & pigtail cable, dummy
plugs, & jackscrew kit. To order PDIM mount kit & CTD interface
cable, see SBE 36 Accessories & Spares below.PDIM connector type (standard or wet-pluggable) must match CTD connector type. Wet-pluggable connectors provide easy connectability in damp (e.g., rolling, slippery deck) or cold environments (standard connectors may not seal well in extreme cold; we recommend connecting cables in warm ship’s lab rather than on deck for these conditions). Wet-pluggable connectors are not meant for literally plugging cables in submerged underwater; both our standard connectors & wet-pluggable connectors must be mated in air. |
| 90473 | Underwater Power & Data Interface Module, with wet-pluggable connectors, used with SBE 36 & CTD, 6800 m (does not include CTD interface cable or mounting hardware) | |
|
SBE 36 Accessories & Spares |
||
| 50219 | Mounting block set for PDIM (bolt to cage) | PDIM is either mounted to CTD main housing or to CTD cage, depending on number, size, & mounting requirements of auxiliary sensors included in system. Sea-Bird engineering determines appropriate mounting when written quote is requested. For preliminary cost estimate, assume more expensive mounting option (50219). |
| 50154 | Mounting hardware kit - PDIM or AFM (clamp on housing) | |
| 80591 | Test cable, 11/33/36 deck unit to 9/32/PDIM, 2.4 m (DN 31314) | Connects Sea Cable on SBE 36 to PDIM with standard connectors for testing. 80915 included with standard shipment; these are spares. |
| 80813 | Test cable, 11/33/36 deck unit to 9/32/PDIM, 6 m (DN 31314) | |
| 80915 | Test cable, 11/33/36 deck unit to 9/32/PDIM, 10 m (DN 31314) | |
| 80620 | Test cable, 11/33/36 deck unit to 9/32/PDIM, 15 m (DN 31314) | |
| 17015 | AC power cord (US Standard), 2 m | One of these power cords is included with standard shipment; these are spares. |
| 17824 | AC power cord, European plug, 2 m | |
| 17556 | Deck Unit signal input cable (from slip rings to Deck Unit), 10 m (DN 31371) | Pigtail connects Sea Cable on SBE 36 to slip rings. |
| 17088 | PDIM to SBE 19/25 cable, standard connector, 1.1 m (DN 30567) | Connects PDIM to SBE 19,
19plus,
19plus V2,
25, or 49 CTD:
|
| 171792 | PDIM to SBE 19/25 cable, Wet-pluggable connector, 1.1 m (DN 32810) | |
| 801367 | Cable, QSR/QCR-2200 SPAR to Deck Unit, 15 m (DN 32704) | Connects optional PAR Input (36-1) on SBE 36 to Biospherical surface PAR sensor. See Third Party portion of price list to order surface PAR sensor. |
| 801368 | Cable, QSR/QCR-2200 SPAR to Deck Unit, 30 m (DN 32704) | |
| 801375 | Cable, QSR/QCR-2200 SPAR to Deck Unit, 40 m (DN 32704) | |
| 801369 | Cable, QSR/QCR-2200 SPAR to Deck Unit, 50 m (DN 32704) | |
| 171886 | RS-232 serial cable, DB-25P to DB-9S, 3 m | Connects Serial Data on SBE 36 to computer COM port. Cable included with standard shipment; this is spare. See 171886 for pinouts. |
| 801422 | NMEA Test Cable, DB-9S to MS3106A, SBE 11p/33/36/45, 1.8 m (DN 32786) | Connects NMEA Input on SBE 36 to computer simulating NMEA input for testing SBE 33 NMEA interface. NMEA simulation program, NMEATest, is part of SEASOFT software, & is installed when you install SBE Data Processing. Cable included with standard shipment; this is spare. |
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Last modified: 25 Jun 2008
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: seabird@seabird.com
