SBE 32 Carousel Water Sampler

SBE 32 Carousel Water Sampler

Reliable water sampler with magnetically activated lanyard release latch is compatible with most CTDs. Variety of sizes and configurations (1.7 to 20 liter bottles, 12, 24, or 36 bottles), real-time or autonomous operation.

Full-size, 12-bottle SBE 32 Carousel Water Sampler with Extension Stand for CTD

The SBE 32 Carousel Water Sampler has been extensively deployed throughout the world’s oceans, where it has built a reputation for reliability and ease of use. With an accessory Deck Unit, the Carousel provides water sampling and real-time CTD data acquisition with any Sea-Bird profiling CTD (requires electro-mechanical cable and slip-ring equipped winch). With an accessory underwater unit, the Carousel can operate autonomously with a Sea-Bird profiling CTD and can be programmed to close bottles at selected depths, allowing deployment using non-electrical wire or line.

The Carousel is available in three models:

  • Full-size SBE 32 for a 12 or 24-position system (36-position custom).
  • Compact SBE 32C for a 12-position sampler with bottles up to 8 liters, for use with limited vertical clearance.
  • Sub-Compact SBE 32SC for a 12-position sampler with 1.7 or 2.5-liter bottles, providing a small but full-featured system suited to operation from small boats. (SBE 9plus CTD not compatible with SBE 32SC).

FEATURES

  • 12, 24, or 36 bottles ranging from 1.7 to 30 liters.
  • Easy integration with any Sea-Bird profiling CTD.
  • Autonomous (pre-programmed) or real-time data acquisition and water sampling; bottle firing in any order.
  • Depths to 6800 m (aluminum) or 7000 m (titanium).
  • Seasoft© V2 Windows software package (setup, data upload, real-time data acquisition and keyboard control of bottle firing, data processing).
  • Five-year limited warranty.

COMPONENTS

  • Electronics/release pylon with mounting hub, adapter plates, lifting bail, and guard frame; full-size Carousel includes extension stand for mounting CTD below Carousel frame.
  • Bottles, accessory Deck Unit (for real-time operation) or underwater unit (for autonomous operation), CTD mounting brackets and interface cable, and auxiliary sensors are ordered separately.

AUTONOMOUS OPERATION (no electromechanical cable required)

An accessory underwater unit provides power to and programmable control of the water sampler (close up to 24 bottles):

    

REAL-TIME OPERATION (via electromechanical cable)

Connect an accessory Deck Unit to AC power and the winch slip rings to enable real-time CTD data acquisition and water sampler control from your computer keyboard or Deck Unit panel controls:

  • SBE 11plus Deck Unit for use with SBE 9plus CTD - close up to 36 bottles.
  • SBE 33 Deck Unit for use with other Sea-Bird CTDs (SBE 19, 19plus, 19plus V2, 25, 25plus, or 49) - close up to 24 bottles.

    

Dimensions and Weights

  Diameter
(mm)
Overall Height 1
(mm)
Dry Weight 2
(kg)
SBE 32 Full Size      
12-bottle, 1.2 or 1.7 L 991 1201 68
12-bottle, 2.5 L 991 1438 79
12-bottle, 5 L 991 1234 78
12-bottle, 8 L 991 1438 79
12-bottle, 10 L 991 1603 82
12-bottle, 12 L 991 1730 83
12-bottle, 20 L 1550 1504 185
12-bottle, 30 L 1550 1786 199
24-bottle, 1.2 or 1.7 L 1143 1214 95
24-bottle, 2.5 L 1143 1417 106
24-bottle, 5 L 1550 1300 179
24-bottle, 8 L 1550 1506 185
24-bottle, 10 L 1550 1659 194
24-bottle, 12 L 1550 1786 199
36-bottle Custom; consult Sea-Bird
SBE 32C Compact      
12-bottle, 1.2 to 8 L 966 978 68
SBE 32SC Sub-Compact      
12-bottle, 2.5 L 699 1003 52

1 Overall Height = bottle mount stand + CTD extension stand (if applicable) + height of lifting bail above bottle mount stand (approximately 8 mm). Height does not include optional deck pads.
2 Dry weight (no CTD or bottles).
3 Frame parts: 25.4 mm diameter for full-size SBE 32 12-bottle through 12 L & 24-bottle through 2.5 L, and all 32C and 32SC.
34.9 mm diameter for full-size SBE 32 12-bottle larger than 12 L and 24-bottle larger than 2.5 L.

 

Miscellaneous

Depth Rating 6800 or 7000 m
Materials Anodized aluminum, stainless steel, titanium, Delrin, PVC
Winch Cable Compatibility Single or multi-core armored cable up to 10,000 meters long with an inner core resistance of 0 - 350 ohms
Controller Compatibility Up to 36 bottles with SBE 11plus Deck Unit; up to 24 bottles with SBE 33 Deck Unit, SBE 17plus V2, or AFM

 

Drawings

Full-Size Carousel (12-bottle, 5-liter with SBE 9plus CTD shown; mounting for other CTDs similar)


 

Compact and Sub-Compact Carousel


SBE 9plus shown; other CTDs mounted vertically

CTD mounted vertically
The list below includes (as applicable) the current product brochure, manual, and quick guide; software manual(s); and application notes.

For older SBE 32 product manuals, organized by instrument firmware version, click here.

Title Type Publication Date PDF File
SBE 32 Brochure Product Brochure Monday, July 11, 2016 32brochureJul16.pdf
SBE 32 Manual Product Manual Monday, June 27, 2016 32_023.pdf
Seasave V7 Manual Software Manual Wednesday, November 16, 2016 Seasave_7.26.4.pdf
SBE Data Processing Manual Software Manual Wednesday, November 16, 2016 SBEDataProcessing_7.26.4.pdf
On Sampling Biases arising from Insufficient Bottle Flushing Scientific Poster Wednesday, March 9, 2016 bottleFlushing_poster_OS2016.pdf
Seasave V7 Quick Guide Software Quick Guide Tuesday, August 3, 2010 Seasave_ReferenceSheet_001.pdf
Field Service Bulletin 13: Jackscrew Replacements Field Service Bulletins Monday, March 8, 2010 FSB13.pdf
AN45: Guide to SBE 32 Carousel Water Sampler Configuration Selections Application Notes Tuesday, September 16, 2014 appnote45Sep14.pdf
AN57: Connector Care and Cable Installation Application Notes Tuesday, May 13, 2014 appnote57Jan14.pdf
AN66: Routine Maintenance for the SBE 32 Carousel Water Sampler Application Notes Tuesday, April 16, 2013 appnote66Apr13.pdf
AN71: Desiccant Use and Regeneration (drying) Application Notes Wednesday, May 18, 2016 Appnote71May16.pdf
AN88: Frame Coating Repair for the SBE 32 Carousel Water Sampler Application Notes Wednesday, October 31, 2012 AppNote88Oct12.pdf
SeatermAF© is a terminal program for setup and data upload of Sea-Bird instruments that include Auto-Fire capability for operating a water sampler autonomously on non-conducting cable. SeatermAF is part of our Seasoft V2 software suite.
Version 2.14 released September 17, 2013
SeatermAF_V2_1_4.exe for Windows XP/Vista/7


Seasave V7© acquires, converts, and displays real-time or archived raw data from Sea-Bird profiling CTDs and thermosalinographs, as well as the SBE 16 family of moored CTDs. Seasave V7 is part of our Seasoft V2 software suite.
Version 7.26.6 released December 7, 2016
SeasaveV7.26.6-b26.exe for Windows XP/Vista/7


SBE Data Processing© consists of modular, menu-driven routines for converting, editing, processing, and plotting of oceanographic data acquired with Sea-Bird profiling CTDs, thermosalinographs, and the SBE 16 and 37 families of moored CTDs. SBE Data Processing is part of our Seasoft V2 software suite.
Version 7.26.6 released December 7, 2016


Should I collect water samples (close bottles) on the downcast or the upcast?

Most of our CTD manuals refer to using downcast CTD data to characterize the profile. For typical configurations, downcast CTD data is preferable, because the CTD is oriented so that the intake is seeing new water before the rest of the package causes any mixing or has an effect on water temperature.

However, if you take water samples on the downcast, the pressure on an already closed bottle increases as you continue through the downcast; if there is a small leak, outside water is forced into the bottle, contaminating the sample with deeper water. Conversely, if you take water samples on the upcast, the pressure decreases on an already closed bottle as you bring the package up; any leaking results in water exiting the bottle, leaving the integrity of the sample intact. Therefore, standard practice is to monitor real-time downcast data to determine where to take water samples (locations with well-mixed water and/or with peaks in the parameters of interest), and then take water samples on upcast.

What are the recommended practices for connectors - mating and unmating, cleaning corrosion, and replacing?

Mating and Unmating Connectors:

It is important to prepare and mate connectors correctly, both in terms of the costs to repair them and to preserve data quality. Leaking connectors cause noisy data and even potential system shutdowns. Application Note 57: Connector Care and Cable Installation describes the proper care and installation of connectors for Sea-Bird instruments. The Application Note covers connector cleaning and cable or dummy plug installation, locking sleeve installation, and cold weather tips.

Checking for Leakage and Cleaning Corrosion on Connectors:

If there has been leakage, it will show up as green-colored corrosion product. Performing the following steps can usually reverse the effect of the leak:

  1. Thoroughly clean the connector with water, followed by alcohol.
  2. Give the connector surfaces a light coating of silicon grease.

Re-mate the connectors properly — see Application Note 57: Connector Care and Cable Installation and 9-minute video covering O-ring, connector, and cable maintenance.

Replacing Connectors:

  • The main concern when replacing a bulkhead connector is that the o-rings on the connector and end cap must be prepared and installed correctly; if they are not, the instrument will flood. See the question below for general procedure on handling o-rings.
  • Use a thread-locking compound on the connector threads to prevent the new connector from loosening, which could also lead to flooding.
  • If the cell guard must be removed to open the instrument, take extra care not to break the glass conductivity cell.

An SBE 32 order requires ordering an electronics pylon (32p.xxxx) as well as a frame (32F.xxx). This page lists water sampler ordering information in several sections (click below to scroll to the desired section):

Note: See Third Party Product Configuration for ordering O.T.E. bottles through Sea-Bird or see SBE Improved O.T.E. Water Sampler Bottles for ordering bottles with improved mounting hardware.

SBE 32 (full size)

PART # DESCRIPTION NOTES
32

CAROUSEL WATER SAMPLER (full size) - Multi-bottle sampler. Order SBE 32 pylon (32P.xxxx), SBE 32 frame (32F.xxx), and CTD integration options. Order bottles separately.

Notes:

  • Contact Sea-Bird to order 36-bottle Carousel, which is custom.
  • See SBE 32C Compact (12 or 24 bottles) below, 32SC Sub-Compact Carousel Water Sampler (12 bottles) below, or SBE 55 ECO Water Sampler (3 or 6 bottles) for smaller samplers.
  • Ordering 32 determines appropriate frame size, but does not include cost of bottles; order bottles separately (below).
  • See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011.

 

32P.xxxx - CAROUSEL WATER SAMPLER (full size) PYLON - Includes electronics/release pylon with mounting hub.

Family Model . Pylon (electronics) Housing # Bottle Positions Connectors Interface
32 P – Pylon . 2 – Aluminum (6800 m) 1 – 12 (for full size SBE 32) 1 – XSG/AG 0 – Modem Interface. Compatible with SBE 9plus CTD and 11plus Deck Unit, or SBE 9plus CTD and SBE 17plus V2, or SBE 19, 19plus, 19plus V2, 25, or 25plus CTD and AFM
      3 – Titanium (7000 m) 4 – 24 (for full size SBE 32) 2 – MCBH 1 – Modem Interface plus Serial Interface. Compatible with SBE 19, 19plus, 19plus V2, 25, or 25plus CTD and SBE 33 Deck Unit, in addition to features of Interface ‘0’

Example: 32P.2120 is an SBE 32 pylon with aluminum housing, 12 bottle positions, MCBH connectors, and modem interface. See table below for description of each Pylon selection:

SBE 32 PYLON Housing (Depth) Selections and Bottle Position Selections — MUST SELECT ONE
32P.21xx Aluminum housing, 6800 meter, 12 bottle capacity Select electronics pylon housing (depth) & number of bottle positions on latch assembly.
32P.24xx Aluminum housing, 6800 meter, 24 bottle capacity
32P.31xx Titanium housing, 7000 meter, 12 bottle capacity
32P.34xx Titanium housing, 7000 meter, 24 bottle capacity
SBE 32 PYLON Connector Selections and Interface Selections — MUST SELECT ONE
32P.xx10 XSG/AG connectors and Modem Interface compatible with SBE 9plus CTD and 11plus Deck Unit, or SBE 9plus CTD and SBE 17plus V2, or SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and AFM. Requires instruments with XSG/AG connectors.

SBE 32 with Modem Interface (32P.xxx0) can be used with following systems:

  • Autonomous operation (no conducting wire; bottles close based on pre-programmed pressures or times) ‑
    SBE 9plus CTD with SBE 17plus V2 Searam;
    SBE 19, 19plus, 19plus V2, 25, or 25plus CTD or SBE 50 Pressure Sensor with AFM;
    No CTD with AFM.

        

SBE 32 with addition of Serial Interface (32P.xxx1) can be used with following system, in addition to systems described for 32P.xxx0:

  • Real-time data acquisition & water sampler control ‑
    SBE 19, 19plus, 19plus V2, 25, 25plus, or 49 CTD with SBE 33 Deck Unit;
    No CTD with SBE 33 Deck Unit.

Notes:

  • Optional auxiliary sensors on CTDs not shown.
  • For real-time systems:
    - Computer, slip-ring-equipped winch, conductive cable, & NMEA 0183 navigation device not supplied by Sea-Bird.
    - Seasave also supports acquisition of data from a NMEA device connected directly to computer (instead of deck unit) for all CTDs shown.

Ordering 32P.xxx1 provides system with most flexibility, allowing you to easily swap equipment at sea to accommodate any application described above. To order system components, see CTD (SBE 9plus, 19plus V2, 25plus, 49, or 50), Deck Unit (SBE SBE 11plus or 33), SBE 17plus for Searam, &/or AFM.

Order SBE 32 pylon with connector type to match connector type on CTD(s) you will use it with — interface cables have same connector type on both ends. Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Most wet-pluggable connectors have a non-conducting guide pin to assist pin alignment (exception: 6-pin connector) & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our XSG/AG connectors. Like XSG/AG connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets.

32P.xx20 Wet-pluggable MCBH connectors and Modem Interface compatible with SBE 9plus CTD and 11plus Deck Unit, or SBE 9plus CTD and SBE 17plus V2, or SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and AFM. Requires instruments with Wet-pluggable connectors.
32P.xx11 XSG/AG connectors and Modem Interface plus Serial Interface (adds two bulkhead connectors). Adds compatibility with real-time operation with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and SBE 33 Deck Unit. Requires instruments with XSG/AG connectors.
32P.xx21 Wet-pluggable MCBH connectors and Modem Interface plus Serial Interface (adds two bulkhead connectors). Adds compatibility with real-time operation with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and SBE 33 Deck Unit. Requires instruments with Wet-pluggable connectors.

 

32F.xxx - CAROUSEL WATER SAMPLER (full size) FRAME - Includes adapter plates, lifting bail, guard frame, CTD extension stand, deck pads, and complete documentation. Bottles are not included.

Family Model . Frame Hardware Material # Bottle Positions Maximum Bottle Size
(order botles separately)
32 F – Frame . 2 – Compatible with Aluminum pylon 1 – 12 (for full size SBE 32) 1 – 1.7 liter
      3 – Compatible with Titanium pylon 4 – 24 (for full size SBE 32) 2 – 2.5 liter
          4 – 5 liter
          5 – 8 liter
          6 – 10 liter
          7 – 12 liter
          8 – 20 liter
          9 – 30 liter

Example: 32F.215 is an SBE 32 frame compatible with an aluminum housing pylon (order pylon separately), 12 bottle positions, sized for 8 liter bottles (order bottles separately). See table below for description of each Frame selection:

SBE 32 FRAME Hardware Material Selections — MUST SELECT ONE
32F.2xx Compatible with Aluminum pylon Hardware (nuts, bolts) used to mount pylon in frame must be compatible with pylon housing material.
32F.3xx Compatible with Titanium pylon
SBE 32 FRAME Number of Bottle Position Selections & Maximum Bottle Size Selections — MUST SELECT ONE
32F.x11 12-bottle positions, 1.7 liter size (same as 5 liter size frame)

Bottle positions defines number of lanyard release latches on pylon, number of bottle mounts, & bottle stand diameter.

Bottle size (volume) affects frame size. Typically, Carousel built for bottles of one size accommodates bottles of all smaller sizes. Consider shipboard storage & handling space limitations, & anticipate maximum bottle size needed. For example, if immediate need is for twelve 5-liter bottles, but 10-liter bottles may be desired in future, specify 12-position, 10-liter SBE 32.
Exceptions: Carousel built for 5-liter bottles does not accommodate 2.5-liter bottles; Carousel built for 20-liter bottles does not accommodate 10- or 12-liter bottles.

This selection determines appropriate frame size, but does not include cost of bottles; order bottles separately.

32F.x12 12-bottle positions, 2.5 liter size (same as 8 liter size frame)
32F.x14 12-bottle positions, 5 liter size (2.5 liter bottles do not fit this frame)
32F.x15 12-bottle positions, 8 liter size
32F.x16 12-bottle positions, 10 liter size
32F.x17 12-bottle positions, 12 liter size
32F.x18 12-bottle positions, 20 liter size (10 and 12 liter bottles do not fit this frame)
32F.x19 12-bottle positions, 30 liter size
32F.x41 24-bottle positions, 1.7 liter size (same as 2.5 liter size frame)
32F.x42 24-bottle positions, 2.5 liter size
32F.x44 24-bottle positions, 5 liter size (2.5 liter bottles do not fit this frame)
32F.x45 24-bottle positions, 8 liter size
32F.x46 24-bottle positions, 10 liter size
32F.x47 24-bottle positions, 12 liter size

 

SBE 32 CTD Integration Selections

SBE 32 CTD Integration Selections (includes interface cables & mounting hardware, but not instrument)
32-4a CTD integration (XSG/AG connectors), SBE 9plus (real-time), horizontal cage mount General Information:

CTD integration options do not involve any modification of SBE 32 itself, but simply provide appropriate mounts & interface cables for systems. See SBE 32 PYLON Connector Selections and Interface Selections above to provide desired functionality.

All CTDs (SBE 9plus, 19, 19plus, 19plus V2, 25, or 25plus) mount horizontally, in their cage, in CTD extension stand that attaches to bottom of SBE 32 frame (CTD extension stand is included in base price of SBE 32 Frame).

SBE 32 shown with 32-4a & SBE 9plus CTD

 

Specific Information:

  • 32-4b & -4c: SBE 19, 19plus, 19plus V2 do not come standard with cage. To order cage for 19plus or 19plus V2, see 19plus V2 listing.
  • 32-4f through -4j: These are same as 32-4a through -4e respectively, except they include wet-pluggable connectors on interface cables. Applicable if wet-pluggable connectors selected for SBE 32 (32P.xx1x) & interfacing CTD / instrument.
32-4b CTD integration (XSG/AG connectors), SBE 19/19plus/19plusV2/25/25plus (real-time), horizontal cage mount. Order cage for 19/19plus/19plusV2 separately.
32-4c CTD integration (XSG/AG connectors), SBE 19/19plus/19plusV2/25/25plus with AFM (auto-fire mode), horizontal cage mount. Order cage for 19/19plus/19plusV2 separately.
32-4d CTD integration (XSG/AG connectors), SBE 9plus with 17plus (auto-fire mode), horizontal cage mount
32-4e SBE 50 and AFM integration (XSG/AG connectors) - enables bottles to be fired at pre-programmed pressures (auto-fire mode) without using a CTD.
32-4f CTD integration (Wet-pluggable connectors), SBE 9plus (real-time), horizontal cage mount. Requires CTD & Carousel with Wet-pluggable connectors.
32-4g CTD integration (Wet-pluggable connectors), SBE 19/19plus/19plusV2/25/25plus (real-time), horizontal cage mount. Requires CTD & Carousel with Wet-pluggable connectors. Order cage for 19/19plus/19plusV2 separately.
32-4h CTD integration (Wet-pluggable connectors), SBE 19/19plus/19plusV2/25/25plus with AFM (auto-fire mode), horizontal cage mount. Requires CTD, Carousel & AFM with Wet-pluggable connectors. Order cage for 19/19plus/19plusV2 separately.
32-4i CTD integration (Wet-pluggable connectors), SBE 9plus with 17plus (auto-fire mode), horizontal cage mount. Requires CTD, Carousel & 17plus with Wet-pluggable connectors.
32-4j SBE 50 and AFM integration (Wet-pluggable connectors) - enables bottles to be fired at pre-programmed pressures (auto-fire mode) without using a CTD. (Requires SBE 50, AFM, and Carousel with Wet-pluggable connectors)
See Spares & Accessories following SBE 32SC listing

 

 

SBE 32C (Compact)

PART # DESCRIPTION NOTES
32C

COMPACT CAROUSEL WATER SAMPLER - Multi-bottle sampler holds 12 bottles of 1.2 through 8-liter sizes (inclusive). Order SBE 32 pylon (32P.xxxx), SBE 32 frame (32F.xxx), and CTD integration options. Order bottles separately.

SBE 32C is shipped fully assembled.

Ordering 32C determines appropriate frame size, but does not include cost of bottles; order bottles separately (below).

See SBE 32 above for sampler with more and/or larger bottles. See SBE 32SC (12 bottles) below or SBE 55 ECO Water Sampler (3 or 6 bottles) for smaller samplers.

Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011.

 

32P.x2xx - COMPACT CAROUSEL WATER SAMPLER - Includes electronics/release pylon with mounting hub.

Family Model . Pylon (electronics) Housing # Bottle Positions Connectors Interface
32 P – Pylon . 2 – Aluminum (6800 m) 2 – 12 (in two arcs; pylon for SBE 32C or 32SC) 1 – XSG/AG 0 – Modem Interface. Compatible with SBE 9plus CTD and 11plus Deck Unit, or SBE 9plus CTD and SBE 17plus V2, or SBE 19, 19plus, 19plus V2, 25, or 25plus CTD and AFM
      3 – Titanium (7000 m)   2 – MCBH 1 – Modem Interface plus Serial Interface. Compatible with SBE 19, 19plus, 19plus V2, 25, or 25plus CTD and SBE 33 Deck Unit, in addition to features of Interface ‘0’

Example: 32P.2220 is an SBE 32C pylon with aluminum housing, 12 botle positions in two arcs, MCBH connectors, and modem interface. See table below for description of each Pylon selection:

SBE 32C PYLON Housing (Depth) Selections — MUST SELECT ONE
32P.22xx Aluminum housing, 6800 meter Select electronics pylon housing (depth).
32P.32xx Titanium housing, 7000 meter
SBE 32C PYLON Connector Selections and Interface Selections — MUST SELECT ONE
32P.x210 XSG/AG connectors and Modem Interface compatible with SBE 9plus CTD and 11plus Deck Unit, or SBE 9plus CTD and SBE 17plus V2, or SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and AFM. Requires instruments with XSG/AG connectors.

SBE 32C with Modem Interface (32P.xxx0) can be used with following systems:


Note: 9plus mounting shown in schematic is for SBE 32, not SBE 32C.

  • Autonomous operation (no conducting wire; bottles close based on pre-programmed pressures or times) ‑
    SBE 9plus CTD with SBE 17plus V2 Searam;
    SBE 19, 19plus, 19plus V2, 25, or 25plus CTD or SBE 50 Pressure Sensor with AFM;
    No CTD with AFM.

            
Note: 9plus mounting shown in schematic is for SBE 32, not SBE 32C.

SBE 32C with addition of Serial Interface (32P.xxx1) can be used with following system, in addition to systems described for 32P.xxx0:

  • Real-time data acquisition & water sampler control ‑
    SBE 19, 19plus, 19plus V2, 25, 25plus, or 49 CTD with SBE 33 Deck Unit;
    No CTD with SBE 33 Deck Unit.

Notes:

  • Optional auxiliary sensors on CTDs not shown.
  • For real-time systems:
    - Computer, slip-ring-equipped winch, conductive cable, & NMEA 0183 navigation device not supplied by Sea-Bird.
    - Seasave also supports acquisition of data from a NMEA device connected directly to computer (instead of deck unit) for all CTDs shown.

Ordering 32P.xxx1 provides system with most flexibility, allowing you to easily swap equipment at sea to accommodate any application described above. To order system components, see CTD (SBE 9plus, 19plus V2, 25plus, 49, or 50), Deck Unit (SBE SBE 11plus or 33), SBE 17plus for Searam, &/or AFM.

Order SBE 32 pylon with connector type to match connector type on CTD(s) you will use it with — interface cables have same connector type on both ends. Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Most wet-pluggable connectors have a non-conducting guide pin to assist pin alignment (exception: 6-pin connector) & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our XSG/AG connectors. Like XSG/AG connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets.

32P.x220 Wet-pluggable MCBH connectors and Modem Interface compatible with SBE 9plus CTD and 11plus Deck Unit, or SBE 9plus CTD and SBE 17plus V2, or SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and AFM. Requires instruments with Wet-pluggable connectors.
32P.x211 XSG/AG connectors and Modem Interface plus Serial Interface (adds two bulkhead connectors). Adds compatibility with real-time operation with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and SBE 33 Deck Unit. Requires instruments with XSG/AG connectors.
32P.x221 Wet-pluggable MCBH connectors and Modem Interface plus Serial Interface (adds two bulkhead connectors). Adds compatibility with real-time operation with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and SBE 33 Deck Unit. Requires instruments with Wet-pluggable connectors.

 

32F.x2x - COMPACT CAROUSEL WATER SAMPLER FRAME - Includes adapter plates, lifting bail, guard frame, and complete documentation. Bottles are not included.

Family Model . Frame Hardware Material # Bottle Positions Maximum Bottle Size
(order botles separately)
32 F – Frame . 2 – Compatible with Aluminum pylon 2 – 12 (in two arcs; for SBE 32C) 5 – 8 liter
      3 – Compatible with Titanium pylon    

Example: 32F.225 is an SBE 32C frame compatible with an aluminum housing pylon (order pylon separately), 12 bottle positions in 2 arcs, sized for up to 8 liter bottles (order bottles separately). See table below for description of each Frame selection:

SBE 32C FRAME Hardware Material Selections — MUST SELECT ONE
32F.225 Compatible with Aluminum pylon Hardware (nuts, bolts) used to mount pylon in frame must be compatible with pylon housing material.
32F.325 Compatible with Titanium pylon

 

SBE 32C CTD Integration Selections

SBE 32C CTD Integration Selections (includes interface cables & mounting hardware, but not instrument)
32C-4a CTD integration (XSG/AG connectors), SBE 9plus (real-time), horizontal mount. Mount bracket uses 9plus without standard protective cage. General Information:

CTD integration options do not involve any modification of SBE 32C itself, but simply provide appropriate mounts & interface cables for systems. See SBE 32 PYLON Connector Selections and Interface Selections above to provide desired functionality.

Specific Information:

  • 32C-4a: Mount bracket allows SBE 9plus main housing & standard sensors (3plus Temperature Sensor, 4C Conductivity Sensor, & 5T Pump) to be mounted horizontally underneath & inside bottle stand. Auxiliary sensors mount on 9plus main housing or vertically on SBE 32C bottle position.


SBE 32C shown with 32C-4a & SBE 9plus CTD

  • 32C-4b through -4e: SBE 19, 19plus, or 19plus V2 CTD mounts vertically to bottle position, using accessory mounting fixture. SBE 25 CTD main housing mounts vertically to bottle position; SBE 25’s standard modular sensors (3F Temperature Sensor, 4C Conductivity Sensor, 5T Pump, & 29 Pressure Sensor) together mount vertically to another bottle position. SBE 25plus CTD main housing mounts vertically to bottle position; SBE 25plus standard modular sensors (3F Temperature Sensor, 4C Conductivity Sensor, 5T Pump) together mount vertically to another bottle position. AFM & auxiliary sensors (fluorometer, transmissometer, etc.) mount to additional bottle positions.


SBE 32C shown with32C-4e & SBE 19 CTD & AFM

  • 32C-4f: Mount bracket for 9plus & 17plus allow them to be mounted horizontally underneath & inside bottle stand. See drawing above for 32C-4a.
  • 32C-4g: AFM & SBE 50 each mount vertically to bottle positions, using accessory mounting fixtures.
  • 32C-4h through -4n: These are same as 32C-4a through -4g respectively, except they include wet-pluggable connectors on interface cables. Applicable if wet-pluggable connectors selected for SBE 32C (32P.xx2x) & interfacing CTD / instrument.
32C-4b CTD integration (XSG/AG connectors), SBE 25/25plus (real-time), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32C-4c CTD integration (XSG/AG connectors), SBE 25/25plus with AFM (auto-fire mode), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32C-4d CTD integration (XSG/AG connectors), SBE 19/19plus/19plusV2 (real-time), vertical in bottle circle.
32C-4e CTD integration (XSG/AG connectors), SBE 19/19plus/19plusV2 with AFM (auto-fire mode), vertical in bottle circle.
32C-4f CTD integration (XSG/AG connectors), SBE 9plus with 17plus (auto-fire mode), horizontal mount. Mount bracket uses 9plus without standard protective cage.
32C-4g SBE 50 and AFM integration (XSG/AG connectors) - enables bottles to be fired at pre-programmed pressures (auto-fire mode) without using a CTD.
32C-4h CTD integration (Wet-pluggable connectors), SBE 9plus (real-time), horizontal mount. Mount bracket uses 9plus without standard protective cage.
32C-4i CTD integration (Wet-pluggable connectors), SBE 25/25plus (real-time), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32C-4j CTD integration (Wet-pluggable connectors), SBE 25/25plus with AFM (auto-fire mode), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32C-4k CTD integration (Wet-pluggable connectors), SBE 19/19plus/19plusV2 (real-time), vertical in bottle circle.
32C-4l CTD integration (Wet-pluggable connectors), SBE 19/19plus/19plusV2 with AFM (auto-fire mode), vertical in bottle circle.
32C-4m CTD integration (Wet-pluggable connectors), SBE 9plus with 17plus (auto-fire mode), horizontal mount. Mount bracket uses 9plus without standard protective cage.
32C-4n SBE 50 and AFM integration (Wet-pluggable connectors) - enables bottles to be fired at pre-programmed pressures (auto-fire mode) without using a CTD.
See Spares & Accessories following SBE 32SC listing

 

SBE 32SC (Sub-Compact)

PART # DESCRIPTION NOTES
32SC

SUBCOMPACT CAROUSEL WATER SAMPLER - Multi-bottle sampler holds 12 small bottles of 1.7 or 2.5 liter sizes (inclusive). Order SBE 32 pylon (32P.xxxx), SBE 32 frame (32F.xxx), and CTD integration options. Order bottles separately.

SBE 32SC is shipped fully assembled.

Ordering 32SC determines appropriate frame size, but does not include cost of bottles; order bottles separately (below).

See SBE 32 and 32C above for sampler with more and/or larger bottles and/or samplers that are compatible for use with SBE 9plus/11plus CTD. See SBE 55 ECO Water Sampler (3 or 6 bottles) for smaller samplers.

Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011.

 

32P.x2xx - SUBCOMPACT CAROUSEL WATER SAMPLER - Includes electronics/release pylon with mounting hub.

Family Model . Pylon (electronics) Housing # Bottle Positions Connectors Interface
32 P – Pylon . 2 – Aluminum (6800 m) 2 – 12 (in two arcs; pylon for SBE 32C or 32SC) 1 – XSG/AG 0 – Modem Interface. Compatible with SBE 19, 19plus, 19plus V2, 25, or 25plus CTD and AFM
      3 – Titanium (7000 m)   2 – MCBH 1 – Modem Interface plus Serial Interface. Compatible with SBE 19, 19plus, 19plus V2, 25, or 25plus CTD and SBE 33 Deck Unit, in addition to features of Interface ‘0’

Example: 32P.2220 is an SBE 32SC pylon with aluminum housing, 12 botle positions in two arcs, MCBH connectors, and modem interface. See table below for description of each Pylon selection:

SBE 32SC PYLON Housing (Depth) Selections — MUST SELECT ONE
32P.22xx Aluminum housing, 6800 meter Select electronics pylon housing (depth).
32P.32xx Titanium housing, 7000 meter
SBE 32SC PYLON Connector Selections and Interface Selections — MUST SELECT ONE
32P.x210 XSG/AG connectors and Modem Interface compatible with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and AFM. Requires instruments with XSG/AG connectors.

SBE 32SC with Modem Interface (32P.xxx0) can be used with following systems:

  • Autonomous operation (no conducting wire; bottles close based on pre-programmed pressures or times) ‑
    SBE 19, 19plus, 19plus V2, 25, or 25plus CTD or SBE 50 Pressure Sensor with AFM;
    No CTD with AFM.

            

SBE 32SC with addition of Serial Interface (32P.xxx1) can be used with following system, in addition to systems described for 32P.xxx0:

  • Real-time data acquisition & water sampler control ‑
    SBE 19, 19plus, 19plus V2, 25, 25plus, or 49 CTD with SBE 33 Deck Unit;
    No CTD with SBE 33 Deck Unit.

Notes:

  • Optional auxiliary sensors on CTDs not shown.
  • For real-time systems:
    - Computer, slip-ring-equipped winch, conductive cable, & NMEA 0183 navigation device not supplied by Sea-Bird.
    - Seasave also supports acquisition of data from a NMEA device connected directly to computer (instead of deck unit) for all CTDs shown.

Ordering 32P.xxx1 provides system with most flexibility, allowing you to easily swap equipment at sea to accommodate any application described above. To order system components, see CTD (SBE 19plus V2, 25plus, 49, or 50), Deck Unit (SBE 33), &/or AFM.

Order SBE 32 pylon with connector type to match connector type on CTD(s) you will use it with — interface cables have same connector type on both ends. Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Most wet-pluggable connectors have a non-conducting guide pin to assist pin alignment (exception: 6-pin connector) & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our XSG/AG connectors. Like XSG/AG connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets.

32P.x220 Wet-pluggable MCBH connectors and Modem Interface compatible with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and AFM. Requires instruments with Wet-pluggable connectors.
32P.x211 XSG/AG connectors and Modem Interface plus Serial Interface (adds two bulkhead connectors). Adds compatibility with real-time operation with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and SBE 33 Deck Unit. Requires instruments with XSG/AG connectors.
32P.x221 Wet-pluggable MCBH connectors and Modem Interface plus Serial Interface (adds two bulkhead connectors). Adds compatibility with real-time operation with SBE 19 / 19plus / 19plus V2 / 25 / 25plus CTD and SBE 33 Deck Unit. Requires instruments with Wet-pluggable connectors.

 

32F.x3x - SUBCOMPACT CAROUSEL WATER SAMPLER FRAME - Includes adapter plates, lifting bail, guard frame, and complete documentation. Bottles are not included.

Family Model . Frame Hardware Material # Bottle Positions Maximum Bottle Size
(order botles separately)
32 F – Frame . 2 – Compatible with Aluminum pylon 3 – 12 (in two arcs; for SBE 32SC) 2 – 2.5 liter
      3 – Compatible with Titanium pylon    

Example: 32F.232 is an SBE 32SC frame compatible with an aluminum housing pylon (order pylon separately), 12 bottle positions in two arcs, sized for 2.5 liter bottles (order bottles separately). See table below for description of each Frame selection:

SBE 32SC FRAME Hardware Material Selections — MUST SELECT ONE
32F.232 Compatible with Aluminum pylon Hardware (nuts, bolts) used to mount pylon in frame must be compatible with pylon housing material.
32F.332 Compatible with Titanium pylon

 

SBE 32SC CTD Integration Selections

SBE 32SC CTD Integration Selections (includes interface cables & mounting hardware, but not instrument)
32SC-4a CTD integration (XSG/AG connectors), SBE 25/25plus (real-time), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage. General Information:

CTD integration options do not involve any modification of SBE 32SC itself, but simply provide appropriate mounts & interface cables for systems. See SBE 32 PYLON Connector Selections and Interface Selections above to provide desired functionality.

Specific Information:

  • 32SC-4a through -4d: SBE 19, 19plus, or 19plus V2 CTD mounts vertically to bottle position, using accessory mounting fixture. SBE 25 CTD main housing mounts vertically to bottle position; SBE 25’s standard modular sensors (3F Temperature Sensor, 4C Conductivity Sensor, 5T Pump, & 29 Pressure Sensor) together mount vertically to another bottle position. SBE 25plus CTD main housing mounts vertically to bottle position; SBE 25plus standard modular sensors (3F Temperature Sensor, 4C Conductivity Sensor, 5T Pump) together mount vertically to another bottle position. AFM & auxiliary sensors (fluorometer, transmissometer, etc.) mount to additional bottle positions.


SBE 32SC shown with32SC-4d & SBE 19 CTD & AFM

  • 32SC-4e: AFM & SBE 50 each mount vertically to bottle positions, using accessory mounting fixtures.
  • 32SC-4f through -4j: These are same as 32C-4a through -4e respectively, except they include wet-pluggable connectors on interface cables. Applicable if wet-pluggable connectors selected for SBE 32C (32P.xx2x) & interfacing CTD / instrument.
32SC-4b CTD integration (XSG/AG connectors), SBE 25/25plus with AFM (auto-fire mode), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32SC-4c CTD integration (XSG/AG connectors), SBE 19/19plus/19plusV2 (real-time), vertical in bottle circle.
32SC-4d CTD integration (XSG/AG connectors), SBE 19/19plus/19plusV2 with AFM (auto-fire mode), vertical in bottle circle.
32SC-4e SBE 50 and AFM integration (XSG/AG connectors) - enables bottles to be fired at pre-programmed pressures (auto-fire mode) without using a CTD.
32SC-4f CTD integration (Wet-pluggable connectors), SBE 25/25plus (real-time), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32SC-4g CTD integration (Wet-pluggable connectors), SBE 25/25plus with AFM (auto-fire mode), vertical housing and sensor pods. Mounting uses 25/25plus without standard protective cage.
32SC-4h CTD integration (Wet-pluggable connectors), SBE 19/19plus/19plusV2 (real-time), vertical in bottle circle.
32SC-4i CTD integration (Wet-pluggable connectors), SBE 19/19plus/19plusV2 with AFM (auto-fire mode), vertical in bottle circle.
32SC-4j SBE 50 and AFM integration (Wet-pluggable connectors) - enables bottles to be fired at pre-programmed pressures (auto-fire mode) without using a CTD.
See Spares & Accessories below

 

 

Spares & Accessories

Spares & Accessories are organized into several categories:

 

Spares & Accessories - Bottles

See one of the following:

 

Spares & Accessories - Hubs & Lifting Bails

PART # DESCRIPTION NOTES
90247
Buy Now
SBE 32 Hub Assembly (also for use when retrofitting G.O. pylons)
  • To retrofit 12-bottle G.O. pylons: purchase electronic release, hub (90247), & lifting bail (50111).
  • To retrofit 24-bottle G.O. pylons: purchase electronic release & hub (90247); use original G.O. lifting bail.

  

90247T
Buy Now
SBE 32 Hub Assembly, for titanium pylon
50111
Buy Now
Carousel lifting bail assembly, 12-position up to 12 liters & 24-position up to 2.5 liters (also for use when retrofitting G.O. 12-position pylons)
50156
Buy Now
Carousel lifting bail assembly, 12-position larger than 12 liters & 24-position larger than 2.5 liters

 

Spares & Accessories - Electronics & Latch Assemblies

Family Model . Pylon (electronics) Housing # Bottle Positions Connectors Interface
32 P – Pylon . 2 – Aluminum (6800 m) 1 – 12 (for full size SBE 32) 1 – XSG/AG 0 – Modem Interface. Compatible with SBE 9plus CTD & 11plus Deck Unit, or SBE 9plus CTD & SBE 17plus V2, or SBE 19, 19plus, 19plus V2, 25, or 25plus CTD & AFM
      3 – Titanium (7000 m) 2 – 12 (in two arcs; for SBE 32C or 32SC) 2 – MCBH 1 – Modem Interface plus Serial Interface. Compatible with SBE 19, 19plus, 19plus V2, 25, or 25plus CTD & SBE 33 Deck Unit, in addition to features of Interface ‘0’
        4 – 24 (for full size SBE 32)    
        5 – 36 (custom)    

Example: 32P.2120 is an SBE 32 pylon with aluminum housing, 12 bottle positions in a full size Carousel, MCBH connectors, and modem interface.

PART # DESCRIPTION NOTES
Aluminum Housings (6800 m) with XSG/AG Connectors

Select appropriate electronics/release, based on following:

  • Housing — aluminum (6800 m) or 3Al2V titanium (7000 m).
  • Connector type — Each housing is available with XSG/AG or wet-pluggable (MCBH) connectors.
  • Latch assembly size / configuration
    12-, 24-, or 36-position latch assembly is used with full size SBE 32 Carousel (36-position Carousel is custom; consult Sea-Bird).
    Compact or Sub-Compact latch assembly used with SBE 32C or 32SC.
    Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that will be implemented in 2011.
      
  • Interface type

Modem interface supports:

  • Real-time data acquisition & water sampler control —
    SBE 9plus CTD with 11plus Deck Unit (not applicable to 32SC).
  • Autonomous operation (no conducting wire required; bottles closed automatically based on pre-programmed pressures or times) ‑
    - SBE 9plus CTD with SBE 17plus V2 Searam.
    - SBE 19, 19plus, 19plus V2, 25, 25plus CTD or SBE 50 Pressure Sensor with AFM.
    - No CTD with AFM.

Serial interface (in addition to modem interface) adds support for real-time operation with SBE 33 Deck Unit:

  • Real-time data acquisition & water sampler control —
    - SBE 19, 19plus, 19plus V2, 25, 25plus CTD with SBE 33 Deck Unit.
    - No CTD with SBE 33 Deck Unit.

 


 

32P.2110 12 position Full size Carousel electronics/release, 6800 meter, with XSG/AG connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.2111 12 position Full size Carousel electronics/release, 6800 meter, with XSG/AG connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.2410 24 position Full size Carousel electronics/release, 6800 meter, with XSG/AG connectors and modem interface for 911plus or AFM (Order interface cables separately)
32P.2411 24 position Full size Carousel electronics/release, 6800 meter, with XSG/AG connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.2210 Compact or Sub-Compact Carousel electronics/release, 6800 meter, with XSG/AG connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.2211 Compact or Sub-Compact Carousel electronics/release, 6800 meter, with XSG/AG connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
Titanium Housings (3AL2V) with XSG/AG Connectors
32P.3110 12 position Full size Carousel electronics/release, 7000 meter, with XSG/AG connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.3111 12 position Full size Carousel electronics/release, 7000 meter, with XSG/AG connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.3410 24 position Full size Carousel electronics/release, 7000 meter, with XSG/AG connectors and modem interface for 911plus or AFM (Order interface cables separately)
32P.3411 24 position Full size Carousel electronics/release, 7000 meter, with XSG/AG connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.3210 Compact or Sub-Compact Carousel electronics/release, 7000 meter, with XSG/AG connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.3211 Compact or Sub-Compact Carousel electronics/release, 7000 meter, with XSG/AG connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.3510 36 position Full size Carousel electronics/release, 7000 meter, with XSG/AG connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
Aluminum Housings (6800 m) with Wet-pluggable (MCBH) Connectors
32P.2120 12 position Full size Carousel electronics/release, 6800 meter, with Wet-pluggable connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.2121 12 position Full size Carousel electronics/release, 6800 meter, with Wet-pluggable connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.2420 24 position Full size Carousel electronics/release, 6800 meter, with Wet-pluggable connectors and modem interface for 911plus or AFM (Order interface cables separately)
32P.2421 24 position Full size Carousel electronics/release, 6800 meter, with Wet-pluggable connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.2220 Compact or Sub-Compact Carousel electronics/release, 6800 meter, with Wet-pluggable connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.2221 Compact or Sub-Compact Carousel electronics/release, 6800 meter, with Wet-pluggable connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
Titanium Housings (3AL2V) with Wet-pluggable (MCBH) Connectors
32P.3120 12 position Full size Carousel electronics/release, 7000 meter, with Wet-pluggable connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.3121 12 position Full size Carousel electronics/release, 7000 meter, with Wet-pluggable connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.3420 24 position Full size Carousel electronics/release, 7000 meter, with Wet-pluggable connectors and modem interface for 911plus or AFM (Order interface cables separately)
32P.3421 24 position Full size Carousel electronics/release, 7000 meter, with Wet-pluggable connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)
32P.3220 Compact or Sub-Compact Carousel electronics/release, 7000 meter, with Wet-pluggable connectors and modem interface for SBE 911plus or AFM (Order interface cables separately)
32P.3221 Compact or Sub-Compact Carousel electronics/release, 7000 meter, with Wet-pluggable connectors, modem interface, plus serial interface for real-time operation with SBE 33 (Order interface cables separately)

 

Spares & Accessories - Cables, Spares Kits, Frame Parts, Mount Kits

PART # DESCRIPTION NOTES
17198 Interface cable, 9plus to 32, AG connectors, 2 m (DN 30568) From Carousel to SBE 9plus (when used with 11plus Deck Unit), SBE 17plus V2, or AFM.
171741 Interface cable, 9plus to 32, Wet-pluggable connectors, 2 m (DN 32758)
80620 Test cable, 11/33/36 deck unit to 9/32/PDIM, RMG connector, 15 m (DN 31314) From SBE 33 Deck Unit to Carousel.
171220 Carousel interface Y-cable, SBE 35/35RT to SBE 9 & SBE 32, AG connectors (DN 32208)

Connection diagram applies to SBE 35
as well as SBE 35RT

SBE 35 or 35RT can record temperature with each bottle closing, for comparison to data from CTD’s temperature sensor.
  • 171220 Y-cable connects SBE 35/35RT to:
    - SBE 9plus CTD & Carousel, when Carousel used with 9plus CTD & 11plus Deck Unit for real-time operation.
    - SBE 17plus V2 & Carousel, when Carousel used with 9plus CTD & 17plus V2 Searam for autonomous operation.
    - AFM & Carousel, when Carousel used with SBE 19, 19plus, 19plus V2, 25, 25plusCTD & AFM for autonomous operation.
  • 171221 cable connects SBE 35/35RT to Carousel, when Carousel used with SBE 19, 19plus, 19plus V2, 25, 25plus CTD & SBE 33 Deck Unit for real-time operation.
171221 Carousel interface cable, SBE 35/35RT to SBE 32, used with SBE 33 Deck unit, AG connectors, 2.4 m (DN 32209)
17120 2-pin sea cable extension, RMG connectors, 2 m (DN 30588) For use with Carousel with serial interface (Carousel used with SBE 19, 19plus, 19plus V2, 25, 25plus CTD & SBE 33 Deck Unit). Female end connects to JB1 on Carousel end cap; male end connects to sea cable. Many users leave extension connected to Carousel, & make connection to sea cable at end of extension (instead of at end cap, which is crowded with a number of connectors & may be difficult to access).
171090 2-pin sea cable extension, RMG connectors, 3 m (DN 30588)
171743 2-pin sea cable extension, Wet-pluggable connectors, 2 m (DN 32763)
171744 2-pin sea cable extension, Wet-pluggable connectors, 3 m (DN 32763)
801435 Data I/O cable, Auto Fire Module (only), RMG-4FS to DB-9S, 2.4 m (DN 32808)
  • 801435 — From AFM to computer COM port.
  • 801436 or 801460 — From AFM or from SBE 55's Electronics Control Module to computer COM port
801436 Data I/O cable, Auto Fire Module or 55 ECM, RMG-4FS to DB-9S, 20 m, shielded (DN 32808)
801460 Data I/O cable, Auto Fire Module or 55 ECM, Wet-pluggable connector (MCIL-4FS) to DB-9S, 20 m, shielded (DN 32861)
50151
Buy Now
SBE 32 spare O-ring kit See document 67050.
50496 Spare latch assembly - plastic side bar (standard from 2012) For 12- or 24-bottle Carousel.
Sea-Bird began shipping these latch assemblies as standard equipment on all Carousels in 2011, replacing PN 50299 (assembly with titanium side bar). See SBE 55 and SBE 32 Change Notice.
50299 Spare latch assembly - titanium side bar (replaces 50150) For 12- or 24-bottle Carousel; see document 67157.
Notes:
- For 36-bottle Carousel, order PN 50428 instead.
- See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011; new latch kit part number is 50496.
801319R SBE 32 12- or 24-position magnet assembly kit (includes magnet, o-ring, screw, washer, insulator) Magnet assembly replacement is difficult to perform; we recommend this work be performed at Sea-Bird.
50112 SBE 32 frame (small frame) assembly kit - includes PN 50211 and 50199 See document 67049 for details. Includes:
  • 50211 — U bolt clamp set for 39-in. & 45-in. diameter extension stand (document 67078)
  • CTD Cage mounting clamps/hardware kit (document 67074)
  • Spare hardware kit, complete, SBE 32 with 1" diameter frame stock (document 67139)
50181
Buy Now
U bolt clamp set (4) for 39-in. & 45-in. diameter extension stand Order 50181 (document 67193) for either of following extension stands:
  • 23675C (39-inch diameter; fits Carousel built for 12-bottles, 1.7- to 12-liter bottle size)
  • 23738C (45-inch diameter; fits Carousel built for 24-bottles, 1.7- to 2.5-liter bottle size)

Order 50212 (document 67226) for 23724C (61-inch diameter) extension stand.

50212
Buy Now
U bolt clamp set (6) for 61-in. diameter extension stand
50297
Buy Now
Deck pad assembly kit for SBE 32 with small frame (1 in. diameter) (document 67117) These are used to protect paint on bottom of Carousel frame.
50296
Buy Now
Deck pad assembly kit for SBE 32 with large frame (1.375 in. diameter) (document 67117)
50199
Buy Now
CTD Cage mounting clamps/hardware kit See document 67074.
50340
Buy Now
Spare hardware kit, complete, full size SBE 32 with 1" diameter frame stock Order 50340 (document 67139) for following versions of full size SBE 32:
  • 12-place (through 12-liter bottle size), &
  • 24-place (through 2.5-liter bottle size).
50341
Buy Now
Spare hardware kit, complete, full size SBE 32 with 1.375" diameter frame stock Order 50341 (document 67140) for following versions of full size SBE 32:
  • 12-place (larger than 12-liter bottle size), &
  • 24-place (larger than 2.5-liter bottle size).
50342
Buy Now
Spare hardware kit, complete, SBE 32C (Compact) & SBE 32SC (Sub-Compact) See document 67141.
50133
Buy Now
SBE 32 pylon only spares kit See document 67023.
50111 Carousel lifting bail assembly, 12-position up to 12 liters & 24-position up to 2.5 liters (also for use when retrofitting G.O. 12-position pylons) Lifting bail assembly includes lifting bail as well as all associated hardware (washers, nuts, & insulators):
  • 50111 (document 67033) — For 12-position full size SBE 32 with bottles up to 12 liters, 24-position full size SBE 32 with bottles up to 2.5 liters, as well as all 32C & 32SC.
  • 50156 — For 12-position full size SBE 32 with bottles larger than 12 liters & 24-position full size SBE 32 with bottles larger than 2.5 liters.

Note: 12-position lifting bail shown.

50156 Carousel lifting bail assembly, 12-position larger than 12 liters & 24-position larger than 2.5 liters
50121 Carousel fixture for mounting SeaCAT or AFM vertically in bottle position Mounts SBE 19, 19plus, or 19plus V2 SeaCAT, SBE 25 or 25plus main housing, or AFM vertically in bottle position on SBE 32C or 32SC. See document 67020.
50123
Buy Now
Carousel tool kit - Hex ballpoint wrenches, screwdrivers, ratchet driver, nicopress sleeves, crimp tool, 2 mm monofilament, flush cut pliers See document 67099.
23675C CTD extension stand for Full size Carousel, 39" diameter x 16" tall, 12 x 1.7-12 liter CTD extension stand attaches to bottom of Carousel frame, for horizontal mounting of CTD in cage beneath Carousel. Extension stand included with standard full size SBE 32.
  • 23675C — fits full size SBE 32 Carousel built for 12-bottles, 1.7- to 12-liter bottle size.
  • 23738C — fits full size SBE 32 Carousel built for 24-bottles, 1.7- to 2.5-liter bottle size.
  • 23724C — fits full size SBE 32 Carousel built for 12-bottles, 20- & 30-liter bottle size & 24-bottles, 5- to 12-liter bottle size.
  • 233785C — fits SBE 32C Compact Carousel

Order u-bolts separately (50211 for 23675C, 23738C, or 233785C extension stand; 50212 for 23724C extension stand).

23738C CTD extension stand for Full size Carousel, 45" diameter x 16" tall, 24 x 1.7-2.5 liter
23724C CTD extension stand for Full size Carousel, 61" diameter x 16" tall, 12 x 20-30 & 24 x 5-12 liter
233785C CTD extension stand for SBE 32C Compact Carousel, 38" diameter x 16" tall
23676C Lower Guard, Full size Carousel, 12 x 1.7 or 5 liter

Photos are shown of typical adapter plates & guards (also called guard rings). Your Carousel may look a little different (for example, proportions may be different, guard rings may have different number of bars).
Example of Carousel size designation: 24 x 5-12 liter is for a Carousel designed for twenty-four 5- to 12-liter bottles.

 

23741C Lower Guard, Full size Carousel, 12 x 2.5 or 8 liter
23683C Lower Guard, Full size Carousel, 12 x 10 liter
23703C Lower Guard, Full size Carousel, 12 x 12 liter
23677C Upper Guard, Full size Carousel, 12 x 1.7-12 liter
23857C Lower Guard, Full size Carousel, 12 x 20 liter or 24 x 8 liter
23719C Lower Guard, Full size Carousel, 24 x 5 liter
23854C Lower Guard, Full size Carousel, 24 x 10 liter
23783C Lower Guard, Full size Carousel, 12 x 30 liter or 24 x 12 liter
23720C Upper Guard, Full size Carousel, 12 x 20 or 30 liter & 24 x 5-12 liter
23737C Lower Guard, Full size Carousel, 24 x 1.7 or 2.5 liter
23736C Upper Guard, Full size Carousel, 24 x 1.7 or 2.5 liter
23792C Lower Guard, Compact Carousel frame
23795C Upper Guard, Compact Carousel frame
231068C Lower Guard, 1.7 liter Sub-Compact Carousel frame
231037C Lower Guard, 2.5 liter Sub-Compact Carousel frame (current standard sub-Compact frame)
231038C Upper Guard, Sub-Compact Carousel frame
70071 Adapter Plate Set (upper & lower), Full size Carousel, 12 x 1.7-12 liter
23902C Adapter Plate, Upper, Full size Carousel, 12 x 20-30 liter
23903P Adapter Plate, Lower, Full size Carousel, 12 x 20-30 liter
23729C Adapter Plate, Upper, Full size Carousel, 24 x 1.7-2.5 liter
23730P Adapter Plate, Lower, Full size Carousel, 24 x 1.7-2.5 liter
235021.02 Adapter Plate, Upper, Full size Carousel, 24 x 5-12 liter
802525 Adapter Plate, Lower, Full size Carousel, 24 x 5-12 liter
23794C Adapter Plate, Upper, Compact Carousel
23793P Adapter Plate, Lower, Compact Carousel
231035C Adapter Plate, Upper, Sub-Compact Carousel
231036P Adapter Plate, Lower, Sub-Compact Carousel
23679C Side Bar 1, Carousel Frame, 12 x 1.7 or 5 liter (3 required)

Side bars connect upper & lower guard rings for SBE 32 (full size) & SBE 32C (compact); SBE 32SC (sub-compact) does not have side bars. For full size SBE 32, there are 2 side bar designs:

  • Side Bar 1 is used at upper guard ring position without riser bar.
  • Side Bar 2 is used at upper guard ring position with riser bar.

Your Carousel may look a little different (for example, proportions may be different, guard rings may have different number of bars).

23681C Side Bar 2, Carousel Frame, 12 x 1.7 or 5 liter (3 required)
23739C Side Bar 1, Carousel Frame, 12 x 2.5 or 8 liter (3 required)
23740C Side Bar 2, Carousel Frame, 12 x 2.5 or 8 liter (3 required)
23680C Side Bar 1, Carousel Frame, 12 x 10 liter (3 required)
23682C Side Bar 2, Carousel Frame, 12 x 10 liter (3 required)
23701C Side Bar 1, Carousel Frame, 12 x 12 liter (3 required)
23702C Side Bar 2, Carousel Frame, 12 x 12 liter (3 required)
23855C Side Bar 1, Carousel Frame, 12 x 20 or 24 x 8 liter (3 required)
23856C Side Bar 2, Carousel Frame, 12 x 20 or 24 x 8 liter (3 required)
23781C Side Bar 1, Carousel Frame, 12 x 30 or 24 x 12 liter (3 required)
23782C Side Bar 2, Carousel Frame, 12 x 30 or 24 x 12 liter (3 required)
23725C Side Bar 1, Carousel Frame, 24 x 2.5 liter (3 required)
23726C Side Bar 2, Carousel Frame, 24 x 2.5 liter (3 required)
23721C Side Bar 1, Carousel Frame, 24 x 5 liter (3 required)
23722C Side Bar 2, Carousel Frame, 24 x 5 liter (3 required)
23852C Side Bar 1, Carousel Frame, 24 x 10 liter (3 required)
23853C Side Bar 2, Carousel Frame, 24 x 10 liter (3 required)
23790C Side Bar, Compact Carousel frame (4 required)

 

Spares & Accessories - Bottle Spare Parts

PART # DESCRIPTION NOTES
50135
Buy Now

OTE bottle repair kit (includes O-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve assembly, air vent, monofilament (6.1 m), brass hook, nicopress sleeves, 2 polyethylene balls)

For Carousel mount, upper & lower bottle end caps are held in place by a length of latex rubber cord that runs inside bottle. When lanyard is released from pylon, latex cord snaps bottle closed.
70172 OTE Messenger weight  
70179
Buy Now
OTE o-ring kit for 1.7-12 liter bottles Kit contains 2 large o-rings for end caps, 1 o-ring for air bleed valve, 3 o-rings for drain.
70173
Buy Now
Latex tubing (power cord) for OTE bottles, 33 m Upper & lower bottle end caps are held in place by a length of latex rubber cord that runs inside bottle. When lanyard is released from pylon, latex cord snaps bottle closed.
70180
Buy Now
Air valve (OTE 112AV) with o-ring
70229
Buy Now
Petcock (drain valve) OTE 112PA1
65001
Buy Now
Crimping tool for Nicopress sleeves

Lanyard loops are made with nylon monofilament & crimped copper nicopress sleeves. Sleeves can be installed with pliers made for crimping on soldered electrical connections.

Order 100 feet of monofilament line to create lanyards for a 12-position Carousel; order 200 feet to create lanyards for a 24-position Carousel.

30664.1
Buy Now
Nicopress oval sleeves, 18-1-C (100/box)
311396.100
Buy Now
Monofilament line, 2.0mm, dark blue, 100 ft
311396.200
Buy Now
Monofilament line, 2.0mm, dark blue, 200 ft
30772
Buy Now
Brass snap hook for bottle lanyards For use on bottle bottom end cap lanyard.
233681
Buy Now
Plastic lanyard ball (single) For use on bottle top end cap lanyard.
90261 Carousel bottle mount bracket, SBE Improved (for 5, 8, 10, 12-liter bottles only) (DN 90261) Bottle mount bracket kit for SBE Improved bottles.
Note: Black glass-filled urethane mount blocks (PN 235292) replaced white Delrin mount blocks (PN 232179) in November 2015, and are backwards compatible.
50265
Buy Now
Single bottle lanyard replacement kit (includes monofilament, brass hook, nicopress sleeves, polyethylene balls)  
50234
Buy Now
12 bottles lanyard replacement kit (includes monofilament, brass hook, nicopress sleeves, polyethylene balls)  
50249
Buy Now
24 bottles lanyard replacement kit (includes monofilament, brass hook, nicopress sleeves, polyethylene balls)  
90262 Carousel bottle mount bracket, SBE Improved, w/ wire clamp for messenger use (for 5, 8, 10, 12-liter bottles only) (DN 40938) For SBE Improved bottles.

Many cables, mount kits, and spare parts can be ordered online.

Cables

  • 17198 To SBE 9plus or 17plus (AG connectors), 2 m, DN 30568
  • 171741 To SBE 9plus or 17plus (Wet-pluggable connectors), 2 m, DN 32758
  • 17292 To SBE 19plus, 19plus V2, 25, or 25plus (RMG connectors), 2 m, DN 30567
  • 171912 To SBE 19plus, 19plus V2, 25, or 25plus (Wet-pluggable connectors), 2 m, DN 32810
  • 80915 To SBE 33 (from SBE 32 XSG connector) (test cable), 10 m, DN 31314
  • 801587 To SBE 33 (from SBE 32 Wet-pluggable connector) (test cable), 10 m, DN 32695
  • 171220 To SBE 35 or 35RT (AG connectors) (when SBE 32 used with SBE 911plus or SBE 32 used with AFM), Y-cable (SBE 9plus/35/32 or AFM/35/32), DN 32208
  • 171995 To SBE 35 or 35RT (Wet-pluggable connectors) (when SBE 32 used with SBE 911plus or SBE 32 used with AFM), Y-cable (SBE 9plus/35/32 or AFM/35/32), DN 32963
  • 171221 To SBE 35 or 35RT (AG connectors) (when SBE 32 used with SBE 33 Deck Unit), 2.4 m, DN 32209
  • 171996 To SBE 35 or 35RT (Wet-pluggable connectors) (when SBE 32 used with SBE 33 Deck Unit), 2.4 m, DN 32964
  • 17168 To Auto Fire Module (AG connectors), 1.1 m, DN 30568
  • 17198 To Auto Fire Module (AG connectors), 2 m, DN 30568
  • 171798 To Auto Fire Module (Wet-pluggable connectors), 1.0 m, DN 32758
  • 171741 To Auto Fire Module (Wet-pluggable connectors), 2 m, DN 32758
  • 171730 To Auto Fire Module and SBE 50 (RMG/AG connectors), DN 32740
  • 171991 To Auto Fire Module and SBE 50 (Wet-pluggable connectors), DN 32959
  • 17120 Sea cable extension for SBE 32 with serial interface (RMG connectors), 2 m, DN 30588
  • 171743 Sea cable extension for SBE 32 with serial interface (Wet-pluggable connectors), 2 m, DN 32763

Mount Kits

Note: Full size SBE 32 comes in 2 frame sizes:

  • Small Frame — 1-inch diameter for 12 place (through 12-liter bottle size) and 24 place (through 2.5-liter bottle size), and
  • Large Frame— 1.375-inch diameter for 12 place (larger than 12-liter bottle size) and 24 place (larger than 2.5-liter bottle size)

SBE 9plus mounted to:

  • SBE 32C (compact)
    50145 SBE 9plus to SBE 32C Mount Kit (document 67069)
  • SBE 32 (full size)
    50199 SBE 9plus to SBE 32 Extension Stand Mount Kit (document 67074)

SBE 9plus Bottom Contact switch mounted to:

SBE 32

  • 50146 Bottom Contact Switch to SBE 32 (1-inch diameter frame) Mount Kit
  • 50147 Bottom Contact Switch to SBE 32 (1.375-inch diameter frame) Mount Kit

SBE 19, 19plus, 19plus V2 mounted to:

SBE 32

  • 50121 SeaCAT/Sealogger/AFM to SBE 32 Bottle Position Mount Kit (document 67020)
  • 50124 SBE 32 Cage Mount Kit — Ring Top; required to mount older CTD cage with ring top in CTD extension stand below full size SBE 32 Carousel (document 67186)

SBE 25 or 25plus mounted to:

SBE 32

  • 50121 SeaCAT/Sealogger/AFM to SBE 32 Bottle Position Mount Kit (document 67020)

AFM mounted to:

SBE 32

  • 50121 SeaCAT, Sealogger, or AFM to SBE 32 Bottle Position Mount Kit (document 67020)

SBE 3, 4, 5, and auxiliary sensors mounted to:

SBE 32C

  • 50216 Multi-sensor mount kit (document 67013)

SBE 27 mounted to:

SBE 32 (for mounting SBE 27 with straight end cap vertically on water sampler frame, when CTD is mounted horizontally in extension stand)

  • 50326 SBE 18/27 to SBE 32 Extension Stand with 1-inch diameter frame stock
  • 50327 SBE 18/27 to SBE 32 Extension Stand with 1.375-inch diameter frame stock

SBE 35RT mounted to:

SBE 32

  • 231561/231562 SBE 35RT Bottle Position Mount Kit
  • 50326 SBE 35RT Mount Kit to SBE 32 extension stand with 1-inch (2.54-cm) diameter post
  • 50327 SBE 35RT Mount Kit to SBE 32 extension stand with 1.375-inch (3.49-cm) diameter post

SBE 32C/32SC

  • 50309 SBE 35RT to SBE 32C or 32SC Mount Kit (document 67120)

Spare Parts

Note: Full size SBE 32 comes in 2 frame sizes:

  • Small Frame — 1-inch diameter for 12 place (through 12-liter bottle size) and 24 place (through 2.5-liter bottle size), and
  • Large Frame— 1.375-inch diameter for 12 place (larger than 12-liter bottle size) and 24 place (larger than 2.5-liter bottle size)

Frame & Electronics

  • 50151 O-ring kit for SBE 32 (document 67050)
  • 50113 Hardware kit for SBE 32 with small frame (document 67010)
  • 50116 Hardware kit for SBE 32 with large frame (document 67086)
  • 50142 Hardware kit for SBE 32C or 32SC (document 67011)
  • 50195 Hardware kit for SBE 32SC (document 67046)
  • 50130.1 Hardware kit for SBE 32C (document 67048)
  • 50130 Hardware kit for SBE 32C or 32SC (document 67047)
  • 50111 Lifting bail kit for SBE 32 with small frame, 32C, or 32SC (document 67033)
  • 50133 O-ring & hardware kit for SBE 32 with aluminum pylon (for latches & pylon) (document 67023)
  • 50279 O-ring & hardware kit for SBE 32 with titanium pylon (for latches & pylon) (document 67109)
  • 50172 O-ring & hardware kit for SBE 32 (stainless steel) pylon  (document 67054)
  • 50181 Extension stand u-bolt kit for SBE 32 with small frame (document 67193)
  • 50212 Extension stand u-bolt kit for SBE 32 with large frame (document 67226)
  • 50297 Deck pad assembly kit for SBE 32 with small frame (document 67117)
  • 50296 Deck pad assembly kit for SBE 32 with large frame (document 67117)
  • 50112 Frame assembly kit for SBE 32 with small frame (document 67049)
  • 50115 Frame assembly kit for SBE 32 with large frame (document 67079)
  • 50340 Complete hardware kit for SBE 32 with small frame (document 67139)
  • 50341 Complete hardware kit for SBE 32 with large frame (document 67140)
  • 50342 Complete hardware kit for SBE 32C or 32SC (document 67141)
  • 50123 Tool kit for SBE 32, 32C, or 32SC (document 67099)
  • 50439 Frame coating repair kit for SBE 32, 32C, or 32SC (application note 88)

Latches

  • 50299 Latch kit for SBE 32, 32C, 32SC, 55 (document 67157)— for 12-or 24-bottle Carousel
    Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011; new latch kit part number is 50496.
  • 50428 Latch kit for SBE 32 — for 36-bottle Carousel (document 67157)
    Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011.

Bottle Hardware

  • 50265 Single bottle lanyard replacement kit (5 Nico-press sleeves, 8 feet of monofilament line, 1 brass hook, 2 plastic lanyard balls)
  • 50135 Bottle repair kit for OTE water sample bottle (includes O-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls)

Trace Metals / Geotraces Carousels (consult Sea-Bird to verify appropriate kit for your Carousel)

  • 50452 Hardware kit for trace metals Carousel with SBE 19plus V2 mounted vertically to Carousel frame (document 67210)
  • 50436 Hardware kit for Geotraces Carousel with SBE 9plus mounted vertically below Carousel (document 67198)

Compare Water Samplers and CTD Configurations

Water Sampler Number of Bottles Bottle Size (liters) CTD Control Deployment Depth
Real-Time
Configuration
Self-Contained Configuration 
(auto bottle firing)
SBE 32 Carousel Water Sampler
(full size)
12 1.7 - 30 SBE 9plus SBE 11plus V2 Deck Unit SBE 17plus V2 Searam Recorder & Auto Fire Module

6800 m (aluminum), 7000 m (titanium)

24 1.7 - 12
36 Consult Factory
12 1.7 - 30

SBE 19 SeaCAT**
SBE 19plus SeaCAT**
SBE 19plus V2 SeaCAT
SBE 25 Sealogger**
SBE 25plus Sealogger

SBE 33 Carousel Deck Unit
(can also be used with SBE 49 FastCAT CTD Sensor)
Carousel Auto Fire Module (AFM)
(can also be used with SBE 50 Digital Oceanographic Pressure Sensor)
24 1.7 - 12
36 Consult Factory
SBE 32C Carousel Water Sampler
(compact)
12 1.7 - 8 SBE 9plus SBE 11plus V2 Deck Unit SBE 17plus V2 Searam Recorder & Auto Fire Module

6800 m (aluminum), 7000 m (titanium)

SBE 19 SeaCAT**
SBE 19plus SeaCAT**
SBE 19plus V2 SeaCAT
SBE 25 Sealogger**
SBE 25plus Sealogger

SBE 33 Carousel Deck Unit
(can also be used with SBE 49 FastCAT CTD Sensor)
Carousel Auto Fire Module (AFM)
(can also be used with SBE 50 Digital Oceanographic Pressure Sensor)
SBE 32SC Carousel Water Sampler
(sub-compact)
12 1.7 or 2.5

SBE 19 SeaCAT**
SBE 19plus SeaCAT**
SBE 19plus V2 SeaCAT
SBE 25 Sealogger**
SBE 25plus Sealogger

SBE 33 Carousel Deck Unit
(can also be used with SBE 49 FastCAT CTD Sensor)
Carousel Auto Fire Module (AFM)
(can also be used with SBE 50 Digital Oceanographic Pressure Sensor)

6800 m (aluminum), 7000 m (titanium)

SBE 55 ECO Water Sampler 3 or 6 4

SBE 19 SeaCAT**
SBE 19plus SeaCAT**
SBE 19plus V2 SeaCAT
SBE 25 Sealogger**
SBE 25plus Sealogger

SBE 33 Carousel Deck Unit
(can also be used with SBE 49 FastCAT CTD Sensor)

Built-in auto bottle firing, no additional equipment required 600 m

Notes:
1. Operation of all SBE 32 Carousel Water Sampler models with the SBE 33 Deck Unit requires serial interface in the Carousel.
2. See Application Note 45: Guide to SBE 32 Carousel Water Sampler Configuration Options for information on selecting the appropriate Carousel options for your application.
3. ** Products are no longer in production. Follow the links above to the product page to retrieve manuals and application notes for these older products.