SBE 43F Dissolved Oxygen Sensor with Plastic Housing, 0.5 mil Profiling Membrane, IE55 Connector, Glider Plenum
Would you like to use our Product Configurator tool to configure this product before adding it to your cart? If not, you may add it directly to your cart.
High Accuracy and Stability
Fully and individually calibrated; calibration drift rates of less than 0.5% over 1000 hours of operation (on time).
Compatible with Sea-Bird CTDs
For use in CTD pumped flow path, optimizing correlation with CTD measurements.
Oxygen measurement dramatically improved because of improved temperature response. Signal resolution increased by on-board temperature compensation.
Continuous polarization eliminates stabilization wait-time after power-up.
Highly Characterized Response
Hysteresis largely eliminated in upper ocean (1000 m) due to improved temperature response. Hysteresis at greater depths predicatable and correctable in post-processing.
Dissolved Oxygen Accuracy:
± 2% of saturation
Dissolved Oxygen Range:
120% of surface saturation in all natural waters (fresh and salt)
Dissolved Oxygen Typical Stability:
0.5% per 1000 hours of deployed time (clean membrane)
0.5 mil Profiling Membrane
0 - 5 VDC
6.5 - 24 VDC
8 - 20 sec
0.5 kg in air, 0.1 kg in water